Search for auto Exhaust system:
Exhaust system car spares for auto

Information - Exhaust system
Exhaust system is an important component of the vehicle. When fuel burns there are appear exhaust gases, which are removed through the exhaust system. The exhaust system ensures emission of bad-smelling gases. One more important function of the exhaust system is sound insulation. In the engine combustion chambers there are small explosions necessary for fuel combustion, which are relatively loud. Due to the exhaust noise is greatly reduced. For many years now catalysts provide filtration and release of most pollutants from the exhaust gases.
In order the engine to work at a full capacity, it must be well aligned with the exhaust system. The optimum exhaust emission is possible only if the fluctuations that occur in the exhaust system promote and not prevent the process of emission. Torque is also determined by the exhaust. Thus, a faulty exhaust leads to reduction of the engine power. Exhaust system plays an important role in the development of racing cars. Exhaust is also an important factor for ordinary vehicles when it comes to optimizing the efficiency of the engine.
In the positive ignition engine the exhaust system consists of a pipe, Y-shaped symmetrical tee (fork), the catalyst, oxygen sensor (lambda sensor), middle silencer, muffler and exhaust pipe. In some cars exhaust system also includes turbo charger. Because of the high corrosive impact of the exhaust gas components this part is subject to higher wear. This leads, for example, to the fact that as a result of corrosion holes appear. Small holes can be welded. If large areas are damaged, then this item should be replaced. The first sign of the exhaust system failure is the exhaust’s sound changing.
Best goods: Exhaust system spare parts

- Lambda Sensor: Heated
- Thread Size: M18x1.5
- Cable Length [mm]: 580
- Conductor Number: 4
- Voltage [V]: 12
- Condition: New

- Lambda Sensor: Regulating Probe
- Length [mm]: 536
- Number of circuits: 4
- Recommended replace interval [km]: 160000
- Voltage [V]: 12
- Operating Mode: Electric
- Condition: New

- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
- Overall Length [mm]: 750
- Number of circuits: 5
- Recommended replace interval [km]: 250000
- Condition: New
- Internal Thread [mm]: M10 x 1,5
- Quality/ Grade: 10
- Spanner Size: 16
- Bolt Head-/Nut Design: Male Hex
- DIN / ISO: 980
- Weight [kg]: 0,012
- Height [mm]: 10
- Condition: New
- Thread Size: M8
- DIN / ISO: DIN 980 V/9 Cu
- Condition: New
- Gasket Design: Fibre Composite
- Condition: New
- Weight [kg]: 0,006
- Length [mm]: 17,5
- Width [mm]: 9,5
- Height [mm]: 17,5
- Code: 26
- Packing Type: Bag
- Condition: New

- Number of circuits: 4
- Recommended replace interval [km]: 160000
- Connector / Clamp: Connector may need adjustment
- Condition: New

- Fitting Position: Cylinder Head
- Condition: New
- for OE number: 11 62 1 744 323
- Thread Size: M8 x 1,25 mm
- DIN / ISO: DIN 267 Cu
- Spanner Size: 12
- Weight [kg]: 0,0044
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 1,2
- Packaging height [cm]: 1,2
- Packaging Depth [cm]: 0,8
- Condition: New
- Internal Thread [mm]: M8 x 1,25
- Spanner Size: 12
- Bolt Head-/Nut Design: Male Hex
- Weight [kg]: 0,004
- old version
- Condition: New