Search for Drive shaft coupling:
Drive shaft coupling for automobile

- Control arm
- Wheel hub
- Wheel bearing
- Anti roll bar links
- Ball joint
- Wishbone bushes
- Anti roll bar bushes
- Cv boot
- Transmission oil
- Drive shaft
- Cv joint
- Wheel bolt
- Axle bushes
- Automatic transmission fluid
- Steering knuckle
- Beam axle
- Anti roll bar
- Differential
- Propshaft
Choose your car and find high-quality Drive shaft coupler
-
MITSUBISHI
- OUTLANDER
- PAJERO / SHOGUN
- LANCER
Information - Drive shaft flex joint
The hinge of the front suspension is a high quality product with a number of technical advantages, which provide a smooth transfer of all loads from the wheels to the body. It also maintains high ride in different weather conditions during the entire life cycle.
For a long and reliable operation of the drive axles, it is necessary to maintain the recommendable level of oil in the crankcases. Apart from that, the driver must frequently check how well are tightened the bolts attaching the main gear to the crankcase. In order to adjust the main gear, we first must coordinate the primary preload of the cone type bearings, as well as check out the clutch contact of a pair of bevel gears directly to the main transmission. Keep in mind that adjustments can be made only when the main gear is disabled. All work must be accomplished very carefully, because improper adjustment of the bearings can lead not only to damage of bearings, but also to the deterioration of the main transmission.
In order to keep your vehicle on the go and avoid accidents, you must carefully monitor the condition of its main operating units, including the undercarriage. In case of malfunctions, the parts must be repaired or replaced. It is necessary to pay attention to the most important parts of the main mechanisms and to replace the worn out parts.
If you need to buy a hinge disc, do not exhaust yourself with shopping, visit our online store. We offer a wide range of car spare parts. You can acquire not only hinge discs, but also parts like wheel brake cylinders, rear position lamps, oil temperature sensors, as well as brake pads.
What is necessary to know about propeller shaft coupling replacement: lifetime limits, common defects and their signs, tips and recommendations
It is necessary to perform replacement of the component every 120,000 – 150,000 kilometers of mileage. As a rule, the propeller shaft flexible coupling requires replacement due to flexibility loss, or if mechanical damages are present, for example, tears and cracks. Usually, car body vibration, especially noticeable during acceleration, indicates necessity of propeller shaft coupling replacement.
It is necessary to perform diagnostics of the propeller shaft coupling at a service station, as demounting of the propeller shaft, exhaust system elements and the gearbox may be required for gaining of access to the component. After removal of components which impede access to the coupling, specialists will check it for damages presence and wear signs, inspect fastening nuts.
In order to perform replacement of the propeller shaft coupling you need to apply to a service station. For works performance the car should be set on a servicing pit or lifting platform, the propeller shaft – demounted, fasteners of the coupling to flange of the gearbox – unscrewed, and flange with the coupling - demounted. After this, you need to unscrew fastening elements that were left, disconnect the coupling from the flange and install a new one onto it.
Best goods: Drive shaft coupling

- Height [mm]: 30
- Inner diameter [mm]: 50
- Diameter [mm]: 135
- Joint Type: Disc Joint
- Supplementary Article/Supplementary Info: without attachment material
- Bolt Hole Circle Ø [mm]: 96
- Condition: New

- Length [mm]: 88
- Diameter [mm]: 24,0
- Weight [kg]: 0,450
- Condition: New

- Length [mm]: 81,75
- Diameter 1 [mm]: 26,99
- Joint Type: Universal Joint
- Lubrication: with grease lubrication
- Condition: New
- Thickness [mm]: 12
- Bolt Hole Circle Ø [mm]: 110
- Number of Holes: 6
- Fitting Position: Front
- Weight [kg]: 1,466
- for OE number: 26 11 7 542 238
- Observe service information
- Condition: New

- Diameter [mm]: 177
- Number of Holes: 6
- Supplementary Article/Info 2: with bolts/screws
- Fitting Position: Rear
- Weight [kg]: 2,9
- for OE number: 1K0 521 307 A S1
- Observe service information
- Condition: New

- Supplementary Info: 90 Sha
- Joint Type: Disc Joint
- Bolt Hole Circle Ø [mm]: 96
- Inner diameter [mm]: 51
- Diameter [mm]: 136
- Height [mm]: 30
- Quantity: 1
- Quantity Unit: Piece
- Fitting Position: Front and Rear
- Material: PU (Polyurethane)
- Condition: New

- Bolt Hole Circle Ø [mm]: 100
- Material: Elastomer
- Number of Holes: 6
- Weight [kg]: 0,563
- Observe service information
- Supplementary Info: febi Plus
- Condition: New

- Thickness [mm]: 41
- Inner diameter [mm]: 54
- Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 105
- Outer diameter 2 [mm]: 21
- Weight [kg]: 0,921
- Inner diameter 2 [mm]: 12
- Observe service information
- Condition: New

- Weight [kg]: 1
- Condition: New
- Thickness [mm]: 32
- Inner diameter [mm]: 38
- Diameter [mm]: 110
- Bolt Hole Circle Ø [mm]: 78
- Material: Elastomer
- Number of Holes: 6
- Fitting Position: Front
- Weight [kg]: 0,441
- Observe service information
- Condition: New
- Thickness [mm]: 31,9
- Inner diameter [mm]: 70
- Diameter [mm]: 160
- Bolt Hole Circle Ø [mm]: 120
- Material: Elastomer
- Number of Holes: 8
- Supplementary Article/Supplementary Info: with nuts
- Supplementary Article/Info 2: with bolts/screws, with washers
- Weight [kg]: 1,463
- for OE number: 906 411 00 15 S1
- Observe service information
- Supplementary Info: febi Plus
- Condition: New

- Diameter [mm]: 110
- Supplementary Article/Supplementary Info: without attachment material
- Joint Type: Disc Joint
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 78
- Quantity Unit: Piece
- reinforced version
- Condition: New