746004
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
Top spare parts products
incl. 20% VAT, excl. delivery costs
- Alternator Charging Current [A]: 70
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 55
- Pulleys: with multi-belt pulley
- Number of ribs: 6
- Plug Type ID: 0230
- Vehicle Main Current: for vehicles with 12V main current
- Clamp: M8 B+, M5 D+
- Bore Diameter 1 [mm]: 10
- Thickness 1 [mm]: 22
- Net weight [kg]: 4,7
- Condition: Remanufactured
Over 100 in stock
-26%
compared to RRP:
£447.76
incl. 20% VAT, free delivery
- Product line: XT-Professional
- Number of Teeth: 29
- Operating Mode: Mechanical
- Supplementary Article / Supplementary Info Info 2: with belt, with screw, with thermal management module
- Supplementary Article / Supplementary Info: with gaskets/seals, with pipe socket
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Alternator Charging Current [A]: 120
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 54
- Pulleys: with freewheel belt pulley
- Number of grooves: 6
- Plug Type ID: PL57
- Exchange Part
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: Double Pivot Lever
- Recommended additional repairs: V-Belt/V-Ribbed Belt
- Clamp: B+(M8), SIG, FR, A
- Length [mm]: 167
- Distance from belt pulley to alternator [mm]: 42,5
- Condition: Remanufactured
Over 100 in stock
incl. 20% VAT, free delivery
- Alternator Charging Current [A]: 150
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 58,5
- Pulleys: with freewheel belt pulley
- Number of grooves: 6
- Exchange Part
- Rotation Direction: Clockwise rotation
- Alternator Type: excl. vacuum pump
- Fastening Type: Direct fastening
- Recommended additional repairs: V-Belt/V-Ribbed Belt
- Length [mm]: 185
- Distance from belt pulley to alternator [mm]: 43,3
- Condition: Remanufactured
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: NEW STOP&START ORIGINAL PART
- Alternator Charging Current [A]: 180
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 52
- Pulleys: with belt pulley, with V-ribbed belt pulley
- Number of ribs: 6
- Position/Degree: L 80
- Vehicle Equipment: for vehicles with start-stop function
- Rotation Direction: Clockwise rotation
- Fastening Type: Four-point attachment
- Weight [kg]: 9,1
- New part without deposit
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Water pump impeller material: Plastic
- Operating Mode: Electric
- Supplementary Article / Supplementary Info: with vibration dampers
- Voltage [V]: 12
- Diameter 2 [mm]: 40
- Diameter 1 [mm]: 40
- Signal type: PWM
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
- Combi Switch Function: Normally Open Contact
- Temperature range from [°C]: -40
- Temperature range to [°C]: 100
- Resistor [Ohm]: 16
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Water pump impeller material: Plastic
- Operating Mode: electromagnetic
- Impeller Diameter [mm]: 54,7
- Supplementary Article / Supplementary Info Info 2: with seal ring, switchable water pump
- Water pump clutch diameter [mm]: 120
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Alternator Charging Current [A]: 140
- Voltage [V]: 14
- Belt Pulley Ø [mm]: 54
- Pulleys: with freewheel belt pulley
- Number of ribs: 6
- Plug Type ID: 0248
- Vehicle Main Current: for vehicles with 12V main current
- Clamp: M8 B+, L-DFM
- Bore Diameter 1 [mm]: 11
- Net weight [kg]: 6,2
- Length 4 [mm]: 60,0
- Condition: Remanufactured
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Water pump impeller material: Metal
- Number of Teeth: 19
- Water Pump Type: for timing belt drive
- Operating Mode: Mechanical
- Impeller Diameter [mm]: 64
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Supplementary Article / Supplementary Info: do not use sealant
- Number of blades/vanes: 7
- Water Pump Pulley Diameter [mm]: 56,23
- Condition: New
Over 100 in stock
-34%
compared to RRP:
£134.09
incl. 20% VAT, excl. delivery costs
- Alternator Charging Current [A]: 70
- Voltage [V]: 12
- Belt Pulley Ø [mm]: 77,0
- Number of grooves: 1
- Clamp: B+ (M6)
- Quality: +Line Original
- Number of mounting bores: 2
- Mounting Angle [degrees]: -20
- Condition: New
Over 100 in stock