Flywheel 31437703
Article №: 577F0092R
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without screw set
- Condition: New
More
£343,78
incl. 20% VAT, excl. delivery costs
items available: 10
Core exchange £42,32 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: FDE-FO02
Details
- Supplementary Article / Supplementary Info Info 2: with screw set
- Condition: New
More
Article №: 845175
Details
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 20,37, 20,56
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837305
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,2
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- only available in set
- Condition: New
More
Article №: ADBP300081
Details
- Diameter [mm]: 238
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease, with dual-mass flywheel
- Multi-piece: four-piece
- Observe service information
- Condition: New
More
Article №: 837440
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 600 0200 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 600 0277 00
Details
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Article №: 837438
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Article №: DF3045
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with dual-mass flywheel
- Hub Profile: 23.3x26.3
- Multi-piece: four-piece
- Adjustment: without automatic adjustment
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
Article №: 415 0537 11
Details
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: with screw set, Dual-mass flywheel with friction control plate
- Number of mounting bores: 6
- Max. Clearance Angle [Degree]: 19
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
More
Article №: 6366 000 054
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with flywheel screws
- Condition: New
More
Article №: 836188
Details
- Engine Features/Arrangement: for engines with dual-mass flywheel
- for flywheel manufacturer: SACHS
- Diameter [mm]: 240
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info Info 2: without screw set
- Weight [kg]: 13,56
- Condition: New
More
Article №: DMF566
Details
- Diameter [mm]: 240
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Vehicle Equipment: for vehicles with manual transmission
- Supplementary Article / Supplementary Info: without pilot bearing
- Supplementary Article / Supplementary Info Info 2: without screw set, with friction control plate
- Number of mounting bores: 6
- Condition: New
More
Article №: 836222
Details
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Diameter [mm]: 292
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info: with flywheel screws
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- for flywheel depth [mm]: 62,03
- Weight [kg]: 13,59
- Condition: New
More
Article №: ADBP350003
Details
- Hub Inner Diameter [mm]: 33,35
- Hub mounting bore diameter [mm]: 9,50
- Hub Outer Diameter [mm]: 93
- Pitch Circle Diameter, hub [mm]: 66
- Number of hub mounting bores: 6
- Pitch Circle Diameter, clutch pressure plate [mm]: 258
- Inner Diameter Tread [mm]: 142
- Clutch Pressure Plate Outer Diameter [mm]: 244
- Number of clutch pressure plate mounting bores: 6
- Number of Teeth: 113
- Observe service information
- Condition: New
More
Article №: V25-2635
Details
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: with screw set
- Condition: New
More
£129,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: FMFD016
Article №: 009-001-000128R
Details
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Weight [kg]: 12,00
- Generally overhauled
- Exchange Part
- Condition: Remanufactured
More
Article №: FDE-FD23
Article №: 009-001-000210R
Details
- Diameter [mm]: 240
- Weight [kg]: 12,00
- Generally overhauled
- Exchange Part
- Condition: Remanufactured
More
Article №: 479C3389
Details
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Article №: DF3024
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with dual-mass flywheel
- Hub Profile: 23.3x26.3
- Multi-piece: four-piece
- Adjustment: without automatic adjustment
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
Article №: DF3025
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with dual-mass flywheel
- Hub Profile: 20.1x22.6
- Multi-piece: four-piece
- Adjustment: without automatic adjustment
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
Article №: SKCK-0101654
Details
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Showing 25 out of 32 products
Auto Parts for
