Flywheel 03L 105 266 K
Article №: 577F0018
Details
- Number of Teeth: 135
- Number of teeth (finding the max. clearance angle): 7
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Condition: New
More
Article №: FDE-VW03
Article №: 479C0049
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Article №: 479C4321
Details
- Diameter [mm]: 239
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 479C4315
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of mounting bores: 6
- Condition: New
More
Article №: KC116
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Requires special tools for mounting, with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Condition: New
More
Article №: NZS-VW-005
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: without central slave cylinder, with clutch pressure plate
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Fabrication Number: NZS-VW-005
- Condition: New
More
Article №: 835253
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 19,05
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: SWVW-003
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Specification: SMF conversion, without bearing
- Condition: New
More
Article №: 837397
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More
Article №: 600 0017 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: SKCK-0102588
Details
- Diameter [mm]: 239
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 837497
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,88, 17,9
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 29,4
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Overall Length [mm]: 63,1
- only available in set
- Condition: New
More
Article №: F1A100NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Condition: New
More
Article №: 845254
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 19,84
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 845253
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 19,67
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: F1W300NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Condition: New
More
Article №: 98-VW-VW03M
Details
- Diameter [mm]: 240, 239
- Number of Teeth: 23
- Hub Profile: 24,3 x 21,8
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Inner Diameter 2 [mm]: 170
- Condition: New
More
Article №: 600 0299 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 600 0402 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
More
Article №: SKCK-0102582
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of mounting bores: 6
- Condition: New
More
Article №: 836224
Details
- Engine Features/Arrangement: for engines with dual-mass flywheel
- for flywheel manufacturer: LUK
- Diameter [mm]: 289
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info: with flywheel screws
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- for flywheel depth [mm]: 64,23
- Weight [kg]: 12,885
- Condition: New
More
Article №: 415 0431 10
Details
- Transmission Type: Manual Transmission
- Number of mounting bores: 6
- Number of Teeth: 135
- Max. Clearance Angle [Degree]: 18
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Supplementary Article / Supplementary Info Info 2: Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Condition: New
More
Article №: ADV183503
Details
- Number of hub mounting bores: 8
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 8
- Number of teeth (finding the max. clearance angle): 7
- Number of Teeth: 135
- Observe service information
- Condition: New
More
Article №: 577F0018R
Details
- Number of Teeth: 135
- Number of teeth (finding the max. clearance angle): 7
- Number of mounting bores: 6
- Transmission Type: Manual Transmission
- Supplementary Article / Supplementary Info Info 2: Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Condition: New
More
£318,99
incl. 20% VAT, free delivery
Free delivery
Not in stock
Core exchange £36,52 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Showing 25 out of 40 products
Auto Parts for
