Spring cap rear and front for automobile

Spare: Spring cap, Coil spring spacer, Spring spacer, Coil spring plate, Coil spring cap, Coil spring kit front and rear original

Information - Coil spring spacer

Spring spacer: replacement and selection

When and why a spring spacer needs replacement

Manufacturers do not specify replacement terms for this element. Possible defects depend on components production material. For example, a rubber suspension spring spacer can lose its initial elasticity. Moreover, risk of tearing is quite high for this component. Polyurethane spacers often get deformed. While the common defect for metal parts is their corrosive damaging.

Poor condition of non-metallic components is related to off-road operation of the vehicle. And corrosion of aluminum parts can be a result of moisture and road dirt influence. This is greatly determined by part location.

Signs of components unserviceability can be car body roll and insufficient vehicle stability. This happens at straightforward driving and in smooth curves. Moreover, a defect can be detected during technical maintenance.

It is better to perform replacement of these components at a service station. In order to install a new spacer one needs to use a lifting platform and demount a wheel. It is necessary to examine condition of the springs before mounting the spacers. If they are broken down, they are replaced.

If the springs are intact they are cleaned from road dust. Pay attention that it is advisable to replace the spacers in pairs on one axle.

How to select a spring spacer

These components differ in production materials. For example, there are spacers made of aluminum, rubber, polyurethane and plastics. Metallic components reduce the risk of excessive load to bushes, and, as a result, deformation of the car body. Such spacers provide high level of comfort to a driver during vehicle operation. Rubber, polyurethane or plastic parts are resistant to corrosion.

In order to make these components serve you during a continuous time period, purchase products by proven trademarks. For instance, high-quality spring spacers are presented in the assortment of Febi Bilstein, VAICO, Metzger brands.

If you want to purchase the right part, consider the car’s technical characteristics: make, model, production year, body type, trim level and suspension type. It is important to pay attention to thickness, outer and inner diameters of spacers to install them properly. Also it is necessary to take into account the component mounting axle and side.

Spring cap front and rear at low cost: Top Spares

Spring Cap Front Axle (VIKA, 44120068501) -24%
original Spring Cap VIKA 44120068501 Article №: 44120068501
VIKA Spring Cap 44120068501
£ 2,99**
£ 2,27
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Front Axle
  • Thickness [mm] 20,5
  • Weight [kg] 0,14
  • Required quantity 2
  • Inner diameter [mm] 22
  • Diameter [mm] 92
  • Condition  New
Details
Spring Cap Rear Axle (Borsehung, B19164) -24%
original Spring Cap Borsehung B19164 Article №: B19164
Borsehung Spring Cap B19164
£ 4,99**
£ 3,79
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Rear Axle
  • Condition  New
Details
Spring Cap Front Axle, Upper (FEBI BILSTEIN, 29762) -24%
original Spring Cap FEBI BILSTEIN 29762 Article №: 29762
FEBI BILSTEIN Spring Cap 29762
£ 8,49**
£ 6,45
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Inner diameter [mm] 22,0
  • Diameter [mm] 92,0
  • Fitting Position Front Axle, Upper
  • Weight [kg] 0,14
  • Condition  New
Details
Spring Mounting Front Axle, ORIGINAL Quality (MEYLE, 100 412 0026) -24%
original Spring Mounting MEYLE 100 412 0026 Article №: 100 412 0026
MEYLE Spring Mounting 100 412 0026
£ 11,49**
£ 8,73
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Front Axle
  • Supplementary Info ORIGINAL Quality
  • Condition  New
Details
Spring Mounting Rear Axle, ORIGINAL Quality (MEYLE, 014 032 0029) -24%
original Spring Mounting MEYLE 014 032 0029 Article №: 014 032 0029
MEYLE Spring Mounting 014 032 0029
£ 6,49**
£ 4,93
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Rear Axle
  • Height [mm] 18
  • Spring Design Coil Spring
  • Supplementary Info ORIGINAL Quality
  • Condition  New
Details
Supporting Ring, suspension strut bearing CDLC (FEBI BILSTEIN, 23520) -24%
original Supporting Ring, suspension strut bearing FEBI BILSTEIN 23520 Article №: 23520
FEBI BILSTEIN Supporting Ring, suspension strut bearing 23520
£ 5,99**
£ 4,55
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Rear Axle
  • Weight [kg] 0,041
  • Condition  New
Details
Spring Cap Upper, Rear Axle Right, Rear Axle Left (TOPRAN, 112 415) -24%
original Spring Cap TOPRAN 112 415 Article №: 112 415
TOPRAN Spring Cap 112 415
£ 5,99**
£ 4,55
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Upper, Rear Axle Right, Rear Axle Left
  • Mounting Type Rubber Bush
  • Condition  New
Details
Spring Cap ORIGINAL Quality, Upper, Front Axle (MEYLE, 100 412 0022) -24%
original Spring Cap MEYLE 100 412 0022 Article №: 100 412 0022
MEYLE Spring Cap 100 412 0022
£ 6,49**
£ 4,93
incl. 20% VAT, excl. delivery costs
Over 100 items in stock
  • Fitting Position Upper, Front Axle
  • Inner diameter [mm] 22
  • Supplementary Info ORIGINAL Quality
  • Condition  New
Details
  • Best pricesSparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
  • Save on shippingFree shipping on orders over £ 140 within the UK
  • Fast deliveryYou will receive your autoparts order within several working days
PayPal replacement Spring cap rear and front
VISA Spring cap replacement front and rear
Master Card Coil spring spacer rear and front
American Express
Bank Transfer
Please, waitdotted