Clutch kit A5 141 671 F
Article №: 834370
Details
- Product line: KIT3P (CSC)
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Weight [kg]: 6,61
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 834611
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 5,86
- Clutch: for vehicles with push type clutch
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 834538
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 29 x 27
- Weight [kg]: 5,94
- for flywheel manufacturer: LUK
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 3
- Condition: New
More
Article №: 837397
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More
Article №: 837304
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 16,85, 18,5
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 837352
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,04
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- only available in set
- Condition: New
More
Article №: 837342
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,99, 18,38
- Mounting Type: Crimped
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 837346
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,89, 18,03
- Mounting Type: Crimped
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 837405
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98, 18,22
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- only available in set
- Condition: New
More
Article №: SKCK-0102588
Details
- Diameter [mm]: 239
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 837321
Details
- Product line: FULLPACK DMF (CSC)
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,41
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 837409
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,56
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 837348
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,6
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837347
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,21
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 837344
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,33
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 837469
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,84
- Mounting Type: Crimped
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: SKCK-0102582
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of mounting bores: 6
- Condition: New
More
Article №: 837361
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,22
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837359
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,61
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837345
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,37
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 837461
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 837415
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,25
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837546
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,21, 18,05
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 837544
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,05
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Article №: 130015910
£34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 78 products
Show the next items
- 1
- 2
- 3
- 4
Auto Parts for
