8781270
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
Top spare parts products
incl. 20% VAT, excl. delivery costs
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P
- Number of Teeth: 22
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Weight [kg]: 6,07
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 20
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,77, 20,2
- Number of mounting bores: 8
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
Auto Parts for
