Clutch kit 77 01 478 098
Article №: 479C0268
Details
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
- Hub Profile: 24,6 x 21,16
- Weight [kg]: 23,36
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 25
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 625 3056 09
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 625 3052 09
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 625 3052 33
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 828042
Details
- Supplementary Info: KIT2P
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Weight [kg]: 6,62, 6,33
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
More
Article №: ADBP300041
Details
- Diameter [mm]: 251
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- for OE number: 77 01 478 098
- Observe service information
- Condition: New
More
Article №: 625 3056 35
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 625 3056 33
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Transmission Type: not for semi-automatic
- Adjustment: with automatic adjustment
- Number of mounting bores at central slave cylinder: 2
- Condition: New
More
Article №: 3000 951 944
Details
- Product line: XTend
- Diameter [mm]: 250
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 21,30x24,5-21N
- Observe service information
- only available in set
- Condition: New
More
Article №: SKCK-0100269
Details
- Diameter [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Hub Profile: 24,6 x 21,16
- Weight [kg]: 22,725
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 25
- Condition: New
More
Article №: F11099NX
Details
- Diameter [mm]: 250
- Diameter 1 [mm]: 250
- Diameter 2 [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 21,16 x 24,6
- Version: HEC
- Condition: New
More
Article №: DMV239M
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel, with bolts/screws
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 24.6 x 21
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 10502
Details
- Diameter 1 [mm]: 250
- Diameter 2 [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Hub Profile: 24,6 x 21,16
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- New part without deposit
- Condition: New
More
Article №: 600 0204 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
More
Article №: 600 0064 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Transmission Type: not for semi-automatic
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 8
- Number of mounting bores at central slave cylinder: 2
- Condition: New
More
Inside the package:
More
Article №: 600 0268 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 8
- Condition: New
More
Article №: 479C3381
Details
- Diameter [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 479C2871
Details
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Weight [kg]: 20,3
- Mounting Type: Clipped
- for flywheel manufacturer: VALEO
- Number of mounting bores: 8
- Bore Diameter [mm]: 30
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Material: Plastic
- Condition: New
More
Article №: 5104045
Details
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with Centering Pin
- Supplementary Article / Supplementary Info: with clutch pressure plate
- for OE number: 302052799R
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
More
Article №: QKT4136AF
Details
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: without central slave cylinder
- Friction Lining Outer Diameter [mm]: 250
- Condition: New
More
Article №: 3000 951 942
Details
- Product line: XTend
- Diameter [mm]: 250
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 24x48-21N
- only available in set
- Condition: New
More
Article №: 625 3056 34
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 962444
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 24,5 x 21
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 625 3052 34
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: SKCK-0101646
Details
- Diameter [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Showing 25 out of 39 products