7485141511
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
Top spare parts products
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: without central slave cylinder
- Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission
- New Part
- Hub Profile: 24 x 20
- Weight [kg]: 5,55
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
LuK 624 4140 09 Clutch kit
incl. 20% VAT, free delivery
-
- Construction Year to: 05/2018
- Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission
- Diameter [mm]: 239
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 20,37, 20,56
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
-60%
compared to RRP:
£363,23
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23,3x26,3-23N
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
-46%
compared to RRP:
£800,97
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: RepSet
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
-50%
compared to RRP:
£235,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 27 x 23
- Weight [kg]: 5,63
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
Auto Parts for
