Clutch kit 55352485
Article №: 837542
Details
- Number of Teeth: 14
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 17,08
- Number of mounting bores: 8
- Tightening Torque [Nm]: 70
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More
Top spare parts products
-67%
compared to RRP:
£773,03
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- only available in set
- Condition: New
Over 100 in stock
-60%
compared to RRP:
£610,67
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 16,85, 18,5
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: DFC
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Mounting Type: Pre-assembled
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
-59%
compared to RRP:
£425,53
incl. 20% VAT, free delivery
- Product line: Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 950 070
- Condition: New
Over 100 in stock
-12%
compared to RRP:
£1595,56
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: New
Over 100 in stock
-71%
compared to RRP:
£411,52
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Mounting Type: Pre-assembled
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
-54%
compared to RRP:
£263,47
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
Auto Parts for
