Clutch kit 3G 105 266 BB
Article №: NZS-VW-005
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: without central slave cylinder, with clutch pressure plate
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Fabrication Number: NZS-VW-005
- Condition: New
More
Article №: QKT5350AF
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 21.8x24.2
- Friction Lining Outer Diameter [mm]: 240
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: 10791
Details
- Diameter 1 [mm]: 240
- Diameter 2 [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- for flywheel manufacturer: LUK
- New part without deposit
- Condition: New
More
Article №: SWVW-003
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Specification: SMF conversion, without bearing
- Condition: New
More
Article №: 845253
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 19,67
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 837397
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More
Article №: 837497
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,88, 17,9
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 29,4
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Overall Length [mm]: 63,1
- only available in set
- Condition: New
More
Article №: 835253
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 19,05
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 845254
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, without sensor
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,84
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: F1W300NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Condition: New
More
Article №: 836224
Details
- Engine Features/Arrangement: for engines with dual-mass flywheel
- for flywheel manufacturer: LUK
- Diameter [mm]: 289
- Number of mounting bores: 6
- Supplementary Article / Supplementary Info Info 2: with screw set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- for flywheel depth [mm]: 64,23
- Weight [kg]: 12,885
- Condition: New
More
Article №: ADV183503
Details
- Number of hub mounting bores: 8
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 8
- Number of teeth (finding the max. clearance angle): 7
- Number of Teeth: 135
- Weight [kg]: 11,500
- Observe service information
- Condition: New
More
Article №: 479C0057
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 19,31
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: SL 4DS1055
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 21,8 x 24,2
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More
Article №: STO1045
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, with screw set
- Supplementary Article / Supplementary Info: with single-mass flywheel, with clutch pressure plate
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Additionally required articles (article numbers): 9925
- Condition: New
More
Article №: 845210
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,62, 19,8, 19,5
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 110
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 835153
Details
- Supplementary Info: CONVERSION KIT
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 19,31
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 110
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: MK40033
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Condition: New
More
Article №: 845153
Details
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Weight [kg]: 20,48
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 110
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 828375
Details
- Supplementary Info: SERVICE KIT2P for CONVERSION KIT
- Supplementary Article / Supplementary Info Info 2: without flywheel, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Weight [kg]: 6,47
- only in connection with: 835066
- Condition: New
More
Article №: 98-VW-VW03M
Details
- Diameter [mm]: 240, 239
- Number of Teeth: 23
- Hub Profile: 24,3 x 21,8
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Inner Diameter 2 [mm]: 170
- Condition: New
More
Article №: LKCA600072F
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Weight [kg]: 18,800
- Number of Parts [parts]: 3
- Condition: New
More
Article №: KV-VW03M
Details
- Diameter [mm]: 240, 239
- Number of Teeth: 23
- Hub Profile: 24,3 x 21,8
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Inner Diameter 2 [mm]: 170
- Condition: New
More
Article №: 835066
Details
- Product line: CONVERSION KIT
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
- New Part
- Weight [kg]: 19,5
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 110
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Auto Parts for
