Clutch Pressure Plate 20-0157
Article №: 120 0028 11
Details
- Technical Information Number: A
- Condition: New
More
Article №: CA0078T
Details
- Fitting Position: Rear Axle
- Cable Length [mm]: 1530
- Sensor Type: Active sensor
- Condition: New
More
£19,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Top spare parts products
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without cable
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without cable
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter: 240
- Number of Teeth: 20
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without cable
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: without cable
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,77, 20,2
- Number of mounting bores: 8
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- MAPP code available
- Supplementary Article / Supplementary Info Info 2: without cable
- Condition: New
Over 100 in stock
Auto Parts for
