Clutch kit 0A5 141 671 F


Article №: ADV183071
Details
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: four-piece
- Weight [kg]: 17,995
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Observe service information
- Condition: New
More


Article №: 624 3395 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3715 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3553 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3715 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3023 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3281 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 624 3230 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 600 0017 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More

Article №: 624 3753 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: ADBP300215
Details
- Diameter [mm]: 251
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease, with central slave cylinder
- Multi-piece: three-piece
- Weight [kg]: 5,912
- Observe service information
- Condition: New
More

Article №: KC074
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- for OE number: 038 105 266 CE
- Condition: New
More

Article №: 837397
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More

Article №: 624 3783 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: F1A302NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Number of mounting bores: 6
- Condition: New
More

Article №: 837304
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 16,85, 18,5
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More

Article №: 837352
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,04
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- only available in set
- Condition: New
More

Article №: 837346
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,89, 18,03
- Mounting Type: Crimped
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More

Article №: 600 0013 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch Pressure Plate 1
- Clutch Disc 1
- Clutch kit 1
- Dual mass flywheel 1
More


Article №: F1W300NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Condition: New
More

Article №: SKCK-0102588
Details
- Diameter [mm]: 239
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Condition: New
More

Article №: 837321
Details
- Product line: FULLPACK DMF (CSC)
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,41
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
More


Article №: 600 0321 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
More


Article №: 837405
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98, 18,22
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- only available in set
- Condition: New
More


Article №: 837342
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,99, 18,38
- Mounting Type: Crimped
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Showing 25 out of 223 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9