Clutch kit 03G 141 015 F

Article №: 10S9040-OYO
Details
- Number of Teeth: 28
- Number of mounting bores: 6
- Condition: New
More

Article №: QKT2881AF
Details
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Friction Lining Outer Diameter [mm]: 228
- Condition: New
More

Article №: 623 3082 21
Details
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch slave cylinder, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More

Article №: 835035
Details
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
More


Article №: 837073
Details
- Product line: FULLPACK DMF
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 15,03
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More

Article №: 600 0016 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More

Article №: F1W301NX
Details
- Diameter [mm]: 229
- Number of Teeth: 28
- Number of mounting bores: 6
- Condition: New
More


Article №: 837075
Details
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 14,85
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More

Article №: SKCK-0102570
Details
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing, with flywheel, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of mounting bores: 6
- Condition: New
More


Article №: 600 0199 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More


Article №: 600 0169 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More

Article №: KE-VG47
Details
- Diameter [mm]: 230
- Number of Teeth: 28
- Condition: New
More


Article №: 837074
Details
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 14,9
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More


Article №: 600 0198 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More


Article №: 837112
Details
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 14,85
- for flywheel manufacturer: VALEO
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
More

Article №: 600 0087 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More

Article №: SKE-VW94
Details
- Diameter [mm]: 230
- Number of Teeth: 28
- Condition: New
More

Article №: SKE-VW84
Details

Article №: 479C0350
Details
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with lock screw set, with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Weight [kg]: 14,85
- Extention Force [N]: 5550
- for flywheel manufacturer: VALEO
- Number of mounting bores: 6
- Condition: New
More


Article №: 1610625
Details
- Production Number: K1610625
- Condition: New
More
£ 63,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: SL 3DS1247
Details
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- for flywheel manufacturer: LUK
- Condition: New
More
£ 71,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MK10094
Details
- Diameter [mm]: 230
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Condition: New
More
£ 97,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: HK2119
Details
- Diameter [mm]: 228
- Number of Teeth: 28
- Hub Profile: 22.1 x 20.3
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Number of Parts [parts]: 3
- Condition: New
More
£ 127,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: LKCA600114
Details
- Diameter [mm]: 230
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Weight [kg]: 5,040
- Number of Parts [parts]: 3
- Condition: New
More

Article №: 61-5353
Details
- Hub Profile: 20,3x22,1 - 28N
- Friction Lining Outer Diameter [mm]: 230
- for flywheel manufacturer: LUK
- Plate diameter [mm]: 230
- Condition: New
More
Showing 25 out of 63 products
Show the next items
- 1
- 2
- 3