Search for car Steering:
Car Steering system parts
Choose your car and find high-quality Power steering car spares
Information - Power steering
Steering system includes all the parts necessary for driving from the steering wheel to the steering gear. Steering provides change in direction when driving. Therefore, each car has this system. Modern cars are equipped with steering booster. Rotation of the steering wheel is supported by the booster, for example, a hydraulic one. Thus, only minor effort is required from the driver. In older vehicles the steering motion is purely mechanical, so that drivers must make efforts especially at low speeds.
In motor cars the steering is usually implemented only on the front axle. But the rear axle is fixed. It is also used axial steering when each wheel is independently suspended. The driver controls the steering with the steering wheel. Even if the steering wheel booster is faulty, it is still possible to steer. It can be dangerous if the steering booster fails while driving. Because of the effect of surprise the driver can react in a wrong way. Steering also includes bellows, head of the tie rod, ball joint and steering gear.
If you have problems with the steering, there may be several reasons. If the car does not ride straight on the straight path without direction correction by the driver, it is necessary to check the toe-in. If there are problems with the steering, you should immediately drive to a car repair shop. This system provides vehicle safety. Therefore, it must be repaired only by skilled technicians. Improper installation of small parts could cause an accident. Careful car operation and timely appeal to the car repair shop will help to avoid this.
Best goods: Steering system car spare parts
- Length [mm]: 94
- Thread Size 2: M14x1,5
- Cone Size [mm]: 12,2
- Thread Size: M14x1,5
- Condition: New
- Fitting Position: outer, both sides, Front Axle
- Length [mm]: 70, 38
- Thread Size 1: M12X1.5
- Thread Size 2: M10X1.25
- Cone Size [mm]: 10,7
- Cone Pitch: 1/6
- Thread Type: with right-hand thread
- Shape: straight
- Packing Type: Box
- Condition: New
- Fitting Position: Front Axle, Left, outer
- Length [mm]: 90
- Thread Size 1: M14X1.5
- Thread Size 2: M10X1.25
- Cone Size [mm]: 11,8
- Cone Pitch: 1/5
- Diameter 1 [mm]: 14,5
- Condition: New
- Fitting Position: Front axle both sides
- Length [mm]: 240
- Thread Size 1: M16x1,5
- Thread Size 2: M14x1,5
- Condition: New
- Fitting Position: Front Axle, Right, outer
- Length [mm]: 94
- Thread Size 1: M14x1,5
- Thread Size 2: M12x1,5
- Cone Size [mm]: 13,3
- Bolt Head-/Nut Design: Hexagon Socket
- Condition: New
- Fitting Position: Front Axle, Left, outer
- Length [mm]: 94
- Thread Size 1: M14x1,5
- Thread Size 2: M12x1,5
- Cone Size [mm]: 13,3
- Cone Pitch: 1/5
- Condition: New
- Fitting Position: Front Axle Right
- Length [mm]: 209
- Thread Size 1: MM10X1.25R
- Cone Size [mm]: 12
- Cone Pitch: 1/5
- Thread Size: FM14X1.5R
- Shape: angled
- Condition: New
- Fitting Position: Front Axle Left
- Length [mm]: 209
- Internal Thread [mm]: M14x1,5
- External Thread [mm]: M10x1,25
- Cone Size [mm]: 12
- Cone Pitch: 1/5
- Shape: angled
- Condition: New
- Fitting Position: both sides, inner, Front Axle
- Length [mm]: 332
- Thread Type: with right-hand thread
- Thread Size 1: M16X1.5
- Thread Size 2: M16X1.5
- Diameter 1 [mm]: 16
- Packing Type: Box
- Condition: New
- Fitting Position: outer, Left, Front Axle
- Length [mm]: 198, 28, 200
- Thread Size 1: M14X1.5
- Thread Size 2: M10X1.25
- Cone Size [mm]: 12
- Thread Size: M14x1,5, M10x1,25
- Shape: angled
- Diameter 1 [mm]: 11,7
- Packing Type: Box
- Condition: New
- Fitting Position: Front Axle Right
- Length [mm]: 195
- Thread Size 1: MM10X1,25R
- Cone Size [mm]: 12
- Cone Pitch: 1/5
- Thread Size: FM14X1,5R
- Condition: New
- Fitting Position: Front
- Length [mm]: 165
- Thread Size 1: M10X1,25
- External Thread [mm]: M14x1,5
- Cone Size [mm]: 12,10
- Cone Pitch: 1/5
- Condition: New
