Search for Clutch cable :

Clutch cables are subject to severe mechanical loads. The first signs of wear become visible when there is an increased use of energy for clutch engagement and noises appeared as a result of this or clutch slipping. In small cars mechanical cable linkage is used as a clutch cable. Its main advantages are simplicity and cheapness.

In order to ensure the tightness of the drive rope there are used rubber and corrugated coverings. Tightness of such covers can be checked by pulling the rope movable rod. In this case the cover should deform towards the axis of the rod under the influence of low pressure in the inner recess of the cover. Corrugated coverings that lost their elasticity or are untight must be replaced. Plastic clamps should be tightened with special equipment. It is not allowed to use cables if there are any ruptures of corrupted covers or rubber gaskets. This can result in early clutch cables failure.

If you need to replace the clutch cable, do not waste time for shops and garages. Thus, you will lose your personal time and overpay for the part you need. Visit our online shop without leaving your home or office. Here you will find a wide assortment of clutch cables for any car brand. Order the necessary part at a remunerative price. We will ensure the delivery to be done in the shortest possible time. In addition to clutch cable we offer you shock absorber bearing, ignition coli, oil pan or evaporator.

What do you need to know about clutch cable: lifetime limits, common defects and their signs, tips and recommendations

The clutch cable doesn’t have strict operation lifetime. Common defects, which require component replacement are: its tearing, damaging of its armored sheath. Usually, foreign sounds during clutch actuation indicate such failures. Moreover, at this defect, the clutch pedal may not return to initial position after pressing.

In order to check condition of the component, you need to open the bonnet and inspect the part for presence of damaging or tearing.

It is recommended to replace the clutch cable at a service station. That is because removal of an old part and installation of a new one come with difficult, experience requiring procedures, such as battery demounting. In addition, after cable replacement, its adjustment will be necessary. If works are performed improperly, then there is a high risk of clutch operation failures during following car exploitation.