Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Coil spring Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Top strut mount and bearing Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Suspension kit, coil springs Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Shock absorber dust cover and bump stops Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Suspension kit, shock absorber and coil spring Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Repair kit, wheel suspension Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Spring cap Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Hydraulic oil Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Camber bolts Passat B6 Variant 2.0FSI 4motion 150 hp Petrol
- Mounting, shock absorbers PASSAT 2.0FSI 4motion 150 hp Petrol
- Relay, leveling control PASSAT 2.0FSI 4motion 150 hp Petrol
- Shock absorber mounting brackets PASSAT 2.0FSI 4motion 150 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Passat B6 Variant 2.0 FSI 4motion 150 hp Petrol
Article №: 854S0086
Details
-
- for PR number: 1JA, 1JC, 1JK, 1JL, 1JR
- Fitting Position: Left, Right
- Shock Absorber System: Normal Suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 593
- min. length [mm]: 359
- Piston Rod Diameter [mm]: 12,5
- Net weight [kg]: 1,55
- Condition: New
More
-48%
compared to RRP:
£ 43,50
£ 22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1530
Details
-
- for PR number: 1JC, 1JK, 1JA, 1JL, 1JR
- Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- max. length [mm]: 593
- min. length [mm]: 359
- Quantity per axle: 1
- Length [mm]: 585, 369
- Thread Size: M10x1
- Standpipe Diameter [mm]: 12
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1546
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Diameter [mm]: 50
- Quantity per axle: 1
- Length [mm]: 560, 389
- Thread Size: M14x1.5
- Standpipe Diameter [mm]: 22
- Condition: New
More
£ 39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1731
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles without electronic suspension control, for vehicles without sports suspension, for vehicles without bad road version
- max. length [mm]: 540
- min. length [mm]: 358
- Required quantity: 1
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£ 41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S0306
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp, Bottom Plate
- Suspension: for vehicles without sports suspension, for vehicles without bad road version
- max. length [mm]: 540
- min. length [mm]: 358
- Piston Rod Diameter [mm]: 25
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
-42%
compared to RRP:
£ 72,50
£ 41,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S18861
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles with sports suspension
- Condition: New
More
-48%
compared to RRP:
£ 234,80
£ 121,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S2669
Details
- Fitting Position: Rear Axle Left
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 1,4
- Operating Mode: Electronic
- Condition: New
More
Article №: 854S2276
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with electronic suspension control
- Operating Mode: Electronic
- Condition: New
More
Article №: 854S2665
Details
- Fitting Position: Rear Axle Right
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 1,4
- Operating Mode: Electronic
- Condition: New
More
Article №: SKSA-0130085
Details
-
- for PR number: 1JA, 1JC, 1JK, 1JL, 1JR
- Fitting Position: Left, Right
- Shock Absorber System: Normal Suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 593
- min. length [mm]: 359
- Piston Rod Diameter [mm]: 12,5
- Net weight [kg]: 1,55
- Condition: New
More
-48%
compared to RRP:
£ 43,50
£ 22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132641
Details
-
- for PR number: 1JC, 1JK, 1JA, 1JL, 1JR
- Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- max. length [mm]: 593
- min. length [mm]: 359
- Quantity per axle: 1
- Length [mm]: 585, 369
- Thread Size: M10x1
- Standpipe Diameter [mm]: 12
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-339953
Details
-
- Suspension: for vehicles without electronic suspension control, for vehicles without sports suspension, for vehicles without bad road version
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Article number of recommended accessories: GH-694706
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-02-010
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with bad road version, for vehicles with standard suspension, for vehicles with heavy duty suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 564773
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Article number of recommended accessories: MK203, PK137
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 593
- min. length [mm]: 370
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4010455
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Production Number: 4010455
- Condition: New
More
£ 28,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000857
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Diameter [mm]: 45
- Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10023
Details
-
- Suspension: for vehicles without electronic suspension control, for vehicles without sports suspension, for vehicles without bad road version
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 564779
Details
-
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£ 30,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSF066G
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with bad road version, for vehicles with heavy duty suspension, for vehicles with standard suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MJ00498
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00498
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1530P
Details
-
- for PR number: 1JC, 1JK, 1JA, 1JL, 1JR
- Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- max. length [mm]: 593
- min. length [mm]: 359
- Quantity per axle: 1
- Length [mm]: 585, 369
- Thread Size: M10x1
- Standpipe Diameter [mm]: 12
- Condition: New
More
-66%
compared to RRP:
£ 111,49
£ 36,84
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132657
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Diameter [mm]: 50
- Quantity per axle: 1
- Length [mm]: 560, 389
- Thread Size: M14x1.5
- Standpipe Diameter [mm]: 22
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0307
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Article number of recommended accessories: 72-2504
- Condition: New
More
£ 43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH540024
Details
-
- for PR number: 1JC, 1JK, 1JA, 1JL, 1JR
- Suspension: for vehicles with sports suspension, for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- max. length [mm]: 593
- min. length [mm]: 359
- Quantity per axle: 1
- Length [mm]: 585, 369
- Thread Size: M10x1
- Standpipe Diameter [mm]: 12
- Condition: New
More
£ 65,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 226 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
