Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit VW Golf 1k5 2.0TDI 131 hp Diesel
- Flywheel VW Golf 1k5 2.0TDI 131 hp Diesel
- Clutch master cylinder VW Golf 1k5 2.0TDI 131 hp Diesel
- Sleeve VW Golf 1k5 2.0TDI 131 hp Diesel
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit VW Golf 1k5 2.0 TDI 131 hp Diesel
Article №: 479C1074
Details
-
- Construction Year to: 11/2008
- Transmission Code: HDV
- Transmission Type: 6-Speed Manual Transmission
- Diameter [mm]: 241, 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 6,45
- Extention Force [N]: 7300
- for flywheel manufacturer: SACHS
- Number of mounting bores at central slave cylinder: 3
- Condition: New
More
Article №: 826731
Details
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 5,52
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: J2000801
Details
-
- Construction Year to: 11/2008
- Transmission Code: HDV
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Friction Lining Outer Diameter [mm]: 240
- Number of Parts [parts]: 2
- Condition: New
More
You may also be interested in
Article №: 600 0017 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 2290 601 060
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Clutch kit 1
- Dual mass flywheel 1
- Bolt Kit, clutch 1
- Grease 1
- Screw Set, flywheel 1
- Screw Set, flywheel 1
More
Article №: 3000 950 019
Details
- Diameter [mm]: 220
- Number of Teeth: 28
- for components see parts list
- Observe service information
- Condition: New
More
£115,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2289 000 299
Details
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- only available in set
- Condition: New
More
Article №: 602 0002 00
Details
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
More
Article №: 3000 970 004
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 21,8x24,3-23N
- Observe service information
- only available in set
- Condition: New
More
£132,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 623 3094 00
Details
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with screw set, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch release bearing 1
- Clutch Pressure Plate 1
- Clutch Disc 1
- Bolt Kit, clutch 1
More
Article №: 624 3180 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 3000 950 072
Details
- Diameter [mm]: 220
- Number of Teeth: 28
- for components see parts list
- Condition: New
More
Article №: ADV1830119
Details
- Diameter [mm]: 200
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 4,068
- Observe service information
- Condition: New
More
£72,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV183056
Details
- Diameter [mm]: 221
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with guide sleeve, with release fork
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 4,690
- Observe service information
- Condition: New
More
£86,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 786080
Details
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 23 x 20
- Weight [kg]: 4,72
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- for flywheel depth [mm]: 17,6
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
More
Article №: 100.762
Details
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with release plate, with clutch disc, with guide sleeve, with release fork
- Hub Profile: 20,3 x 22,1 - 28N
- Clutch Equipment: bearing+sleeve+lever
- Condition: New
More
£99,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 832204
Details
- Product line: KIT3P
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 22 x 20
- Weight [kg]: 5,032
- Clutch: for vehicles with push type clutch
- Control Type: Push control
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
More
Article №: ADV183085
Details
- Diameter [mm]: 220
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 4,700
- Observe service information
- Condition: New
More
£116,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.391
Details
- Diameter [mm]: 230
- Hub Profile: 20,3x22,1 - 28N
- for flywheel manufacturer: LUK
- Condition: New
More
£97,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.763
Details
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with release plate, with clutch disc, with guide sleeve, with release fork
- Hub Profile: 20,3 x 22,1 - 28N
- Clutch Equipment: bearing+sleeve+lever
- Condition: New
More
£96,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10757/1
Details
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc, without flywheel
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 22,1 x 28
- Multi-piece: three-piece
- only in connection with: starrem Schwungrad, Schwungrad 10757/0
- New part without deposit
- Condition: New
More
£92,02
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 990 081
Details
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 21,8x24,3-23N
- Alternative Repair Kit: 3000 970 004
- only to be used within set
- only available in set
- Condition: New
More
Article №: F1W300NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Condition: New
More
Article №: 834619
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 6,15
- Bore Diameter [mm]: 29
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Material: Plastic
- Condition: New
More
Article №: 10749/1
Details
- Diameter [mm]: 200
- Number of Teeth: 28
- Condition: New
More
£58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
