Search for Clutch kit VW GOLF :
VW GOLF Clutch kit
Clutch parts Volkswagen GOLF
- VW GOLF Flywheel
- VW GOLF Clutch master cylinder
- VW GOLF Clutch slave cylinder
- VW GOLF Gear selector cable
More
Best goods: Clutch and flywheel kit VW GOLF
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing, Requires special tools for mounting
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,02
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 1,6
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: DMF Module plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 14,85
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 16,85, 18,5
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: DFC
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Mounting Type: Pre-assembled
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 5,52
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,61
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 19,05
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 210
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: with pressure plate screws
- for components see parts list
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with clutch pressure plate, with flywheel screws, with pressure plate screws
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 970 081
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 190
- Number of Teeth: 24
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: with pressure plate screws
- for components see parts list
- Clutch ID: 190
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
Top Manufacturers: Clutch kit VW GOLF
Clutch set VW GOLF: product prices from popular manufacturers:
| Brand | Number of products | Lowest price | Highest price |
|---|---|---|---|
| LuK | 186 | 89.99 | 1858.49 |
| SACHS | 179 | 65.73 | 1143.49 |
| VALEO | 174 | 5.49 | 1850.49 |
| EXEDY | 84 | 92.49 | 1972.49 |
| AISIN | 63 | 69.49 | 928.49 |
| SACHS PERFORMANCE | 12 | 904.99 | 4530.99 |
186
LuK
179
SACHS
174
VALEO
84
EXEDY
63
AISIN
12
SACHS PERFORMANCE
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 130 within the UK
Fast delivery
