Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Coil spring VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Top strut mount and bearing VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Suspension kit, coil springs VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Shock absorber dust cover and bump stops VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Air suspension VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Suspension kit, shock absorber and coil spring VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Air suspension compressor VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Repair kit, wheel suspension VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Camber bolts VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Leaf spring CADDY 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Mounting, shock absorbers CADDY 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Relay, leveling control CADDY 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber VW Caddy Alltrack IV Van (SAA) 1.4 TGI CNG 110 hp Petrol/Compressed Natural Gas (CNG)
Article №: 854S0067
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- max. length [mm]: 475
- min. length [mm]: 302
- Condition: New
More
£23,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1731
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 540
- min. length [mm]: 358
- Required quantity: 1
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£23,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132842
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 540
- min. length [mm]: 358
- Required quantity: 1
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£23,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-02-019
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 20A9010-OYO
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Housing Diameter [mm]: 55
- Condition: New
More
£23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 313320-PCS-MS
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with lowered suspension, for vehicles with heavy duty suspension, for vehicles with standard suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Quantity per axle: 2
- Net weight [kg]: 1,63
- Gross Weight [kg]: 1,75
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 311427-PCS-MS
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Axle: Reinforced wheel suspension
- Payload: for increased payload
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Quantity per axle: 2
- Net weight [kg]: 1,29
- Gross Weight [kg]: 1,40
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-01-030
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with heavy duty suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 55
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 232-01-085
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with lowered suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£27,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32112400
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Axle: Reinforced wheel suspension
- Payload: for increased payload
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000874
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top eye
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-359961
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Axle: Reinforced wheel suspension
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000484
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 55
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-4258
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Packaging height [cm]: 6
- Packaging Depth [cm]: 42
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000827
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top eye
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10267
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-334707
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with lowered suspension
- Axle: Reinforced wheel suspension
- Payload: for increased payload
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSB182G
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with lowered suspension
- Vehicle configuration line / variant: Eco
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Housing Diameter [mm]: 55
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1731P
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£35,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MJ00686
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- for OE number: 2K0513029B
- Condition: New
More
£36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AGW069MT
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Length [mm]: 314, 452
- Condition: New
More
£36,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00686
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- for OE number: 2K0513029B
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSB165G
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with heavy duty suspension, for vehicles with standard suspension
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MM-00686
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- for OE number: 2K0513029B
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH540010
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Showing 25 out of 101 products
Show the next items
- 1
- 2
- 3
- 4
- 5
