Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Volvo C30 533 T5 250 hp Petrol
- Clutch master cylinder Volvo C30 533 T5 250 hp Petrol
- Central slave cylinder Volvo C30 533 T5 250 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit Volvo C30 533 T5 250 hp Petrol
Article №: ADBP300036
Details
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Engine Number from: 4248478
- Observe service information
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
- Grease 1
More
Article №: ADBP300035
Details
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Engine Number from: 4248478
- Observe service information
- Condition: New
More
Article №: 832197
Details
- Product line: KIT2P
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Weight [kg]: 5,67
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
More
You may also be interested in
Article №: 2290 601 020
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Dual mass flywheel 1
- Bolt Kit, clutch 1
- Grease 1
- Screw Set, flywheel 1
More
Article №: 837305
Details
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,2
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- only available in set
- Condition: New
More
Article №: 600 0200 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 834071
Details
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 17
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 19,9 x 16,9
- Weight [kg]: 5,17
- Clutch Pressure Plate Outer Diameter [mm]: 220
- Condition: New
More
Article №: 845175
Details
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 20,37, 20,56
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 600 0053 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 3000 990 422
Details
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 20
- Alternative Repair Kit: 3000 970 113
- Condition: New
More
Article №: 624 3256 19
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 624 3710 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 3000 970 002
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23x26-23N
- only to be used within set
- only available in set
- Condition: New
More
Article №: 120.661
Details
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23x26 - 23N
- Clutch Equipment: with CSC
- Condition: New
More
Article №: 624 3774 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 3000 951 024
Details
- Diameter [mm]: 220
- Number of Teeth: 17
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- for components see parts list
- Observe service information
- Condition: New
More
£123,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F1G038NX
Details
- Diameter [mm]: 220
- Number of Teeth: 17
- for components see parts list
- Condition: New
More
£109,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 826797
Details
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,2 x 23,2
- Weight [kg]: 5,54
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 834083
Details
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,5 x 23,2
- Weight [kg]: 6,04
- Bore Diameter [mm]: 32
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: New
More
Article №: 826713
Details
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,474 x 23,284
- Weight [kg]: 6,12
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 3000 951 587
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23x26-23N
- Observe service information
- only available in set
- Condition: New
More
£106,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3710 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: NZS-FR-007
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Fabrication Number: NZS-FR-007
- Condition: New
More
Article №: 120.668
Details
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23x26-23N
- Clutch Equipment: with CSC
- Condition: New
More
Article №: 624 3264 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
