Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit VOLVO 440 K (445) 1.7 109 hp Petrol
- Clutch pressure plate VOLVO 440 K (445) 1.7 109 hp Petrol
- Clutch cable VOLVO 440 K (445) 1.7 109 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Clutch kit VOLVO 440 K (445) 1.7 109 hp Petrol
Article №: 479C0125
Details
- Diameter: 200
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Hub Profile: 21,8x20,0-26N
- Multi-piece: three-piece
- Net weight [kg]: 4
- Condition: New
More
£73,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKCK-0100124
Details
- Diameter: 200
- Hub Profile: 21,8x20,0-26N
- Multi-piece: three-piece
- Condition: New
More
£73,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADR163004
Details
- Diameter: 200
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
More
£77,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: HK8467
Details
- Diameter: 200
- Number of Teeth: 26
- Hub Profile: 22 x 20
- TecDoc Engine Number: B 18 EP
- Number of Parts [parts]: 3
- Condition: New
More
£62,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 139933
Details
- Diameter: 200
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Hub Profile: 21,8x20,0-26N
- Net weight [kg]: 4
- Condition: New
More
You may also be interested in
Article №: 620 0342 00
Details
- Product line: RepSet
- Diameter: 200
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Condition: New
More
£69,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 962 001
Details
- Diameter: 200
- Number of Teeth: 26
- Hub Profile: 20x22-26N
- reinforced version
- only available in set
- Condition: New
More
Article №: ADR163028
Details
- Diameter: 201
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
More
£105,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 955421
Details
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 21,9 x 26
- Parameter: 200 CP
- Condition: New
More
£85,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QKT1501AF
Details
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Hub Profile: 22,0
- Friction Lining Outer Diameter [mm]: 200
- Condition: New
More
£112,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2290 601 020
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Dual mass flywheel 1
- Bolt Kit, clutch 1
- Grease 1
- Screw Set, flywheel 1
More
Article №: 600 0149 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 622 3226 34
Details
- Diameter: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
More
Article №: 837438
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 600 0200 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
More
Inside the package:
More
Article №: 834071
Details
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 17
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 19,9 x 16,9
- Weight [kg]: 5,17
- Clutch Pressure Plate Outer Diameter [mm]: 220
- Condition: New
More
Article №: 845175
Details
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 20,37, 20,56
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 600 0053 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 2290 601 117
Details
- Diameter: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
Article №: 623 0370 10
Details
- Product line: RepSet
- Diameter: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc
- Condition: New
More
£106,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3952 33
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: F1G207NX
Details
- Diameter: 240
- Number of Teeth: 23
- Hub Profile: 23x26-23N
- Alternative Repair Kit: 3000 970 002
- Condition: New
More
Article №: 3000 696 001
Details
- Diameter: 228
- Number of Teeth: 20
- for components see parts list
- Condition: New
More
Article №: 624 3710 33
Details
- Diameter: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 120.689
Details
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- for flywheel manufacturer: Sachs
- Clutch Equipment: hydr.bearing(CSC)
- Condition: New
More
