Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Clutch plate VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Clutch pressure plate VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Clutch release bearing VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Clutch cable VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Pilot bearing VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Clutch kit VOLVO 340-360 Saloon (344) 1.4 69 hp Petrol
Article №: 953971
Details
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 23 x 20
- Parameter: M 200
- Condition: New
More
£62,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 3000 170 001
Details
- Diameter [mm]: 190
- Number of Teeth: 20
- Transmission Type: Manual Transmission
- for components see parts list
- Condition: New
More
Article №: 134804
Details
- Diameter [mm]: 200
- Hub Profile: 23,0x20,1-20N
- Net weight [kg]: 5,21
- Condition: New
More
You may also be interested in
Article №: 2290 601 020
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Dual mass flywheel 1
- Bolt Kit, clutch 1
- Grease 1
- Screw Set, flywheel 1
More
Article №: 600 0149 00
Details
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 20
- Number of mounting bores: 8
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Screw Set, flywheel 1
More
Article №: 622 3226 34
Details
- Diameter [mm]: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
More
Article №: 837438
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 3000 694 002
Details
- Diameter [mm]: 240
- Number of Teeth: 20
- for components see parts list
- Condition: New
More
Inside the package:
- Clutch release bearing 1
- Clutch release bearing 1
- Clutch Pressure Plate 1
- Clutch Disc 1
- Grease 1
More
Article №: 624 3261 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 837454
Details
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,77, 20,2
- Number of mounting bores: 8
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: New
More
Article №: 837440
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
More
Article №: 624 3256 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 3000 990 422
Details
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 20
- Alternative Repair Kit: 3000 970 113
- Condition: New
More
Article №: ADF1230120
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
£126,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3952 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 3256 19
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: F1G207NX
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 23x26-23N
- Alternative Repair Kit: 3000 970 002
- Condition: New
More
£138,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADF1230143
Details
- Diameter [mm]: 220
- Number of Teeth: 17
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
More
Inside the package:
More
£109,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3710 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 3297 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 3000 951 548
Details
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23,2x26,3-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: 2290 601 104
Details
- Product line: ZMS Modul
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
Inside the package:
- Central Slave Cylinder, clutch 1
- Clutch kit 1
- Clutch kit 1
- Dual mass flywheel 1
- Grease 1
- Screw Set, flywheel 1
More
Article №: 120.661
Details
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23x26 - 23N
- Clutch Equipment: with CSC
- Condition: New
More
£114,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 3254 34
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
£352,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 130.710
Details
- Number of Teeth: 23
- Hub Profile: 22,9 x 25,9
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: CSC+flywheel, CSC
- Condition: New
More
