Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
-
Steering
- Track rod end Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Inner tie rod Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Tie rod Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Ball joint Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Power steering pump Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Steering rack Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Steering rack boot Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Power steering fluid Vauxhall Insignia Mk1 2.0CDTI 4x4 (68) 170 hp Diesel
- Suspension
- Towbar / parts
- Wiper and washer system
Steering rack Vauxhall Insignia Mk1 2.0 CDTI 4x4 (68) 170 hp Diesel
Article №: 286S1018R
Details
- for POC: NJ1
- Operating Mode: Electronic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Length [mm]: 1252
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Input shaft height [mm]: 120
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,8
- Net weight [kg]: 8
- Supplementary Article / Supplementary Info Info 2: Control unit must be re-programmed at vehicle manufacturer
- Condition: Remanufactured
More
£389,29
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £52,87 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: JRP8120
Details
- Vehicle Identification Number (VIN) from: C1000001
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without sensor
- Vehicle Equipment: for vehicles with power steering
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Thread Size: M16x1.5
- Stroke [mm]: 158
- Axle Joint Length [mm]: 196
- Axle Joint Thread Size: M16x1,5
- Number of steering wheel turns: 2,6
- Exchange Part
- Observe service information
- Condition: Remanufactured
More
Article №: JRP8118
Details
- Vehicle Identification Number (VIN) from: C1000001
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering
- Supplementary Article / Supplementary Info Info 2: without sensor
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Stroke [mm]: 164
- Thread Size: M16x1.5
- Axle Joint Length [mm]: 196
- Axle Joint Thread Size: M16x1,5
- Number of steering wheel turns: 2,7
- Exchange Part
- Observe service information
- Condition: Remanufactured
More
-54%
compared to RRP:
£701,90
£318,98
incl. 20% VAT, free delivery
Free delivery
Not in stock
Details
Article №: JRP8119
Details
- Vehicle Identification Number (VIN) to: B1999999
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without sensor
- Vehicle Equipment: for vehicles with power steering
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Axle Joint Length [mm]: 196
- Axle Joint Thread Size: M16x1,5
- Stroke [mm]: 164
- Number of steering wheel turns: 2,7
- Thread Size: M16x1.5
- Exchange Part
- Observe service information
- Condition: Remanufactured
More
Article №: JRP8121
Details
- Vehicle Identification Number (VIN) to: B1999999
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without sensor
- Vehicle Equipment: for vehicles with power steering
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Axle Joint Length [mm]: 196,2
- Axle Joint Thread Size: M16x1.5
- Stroke [mm]: 158
- Exchange Part
- Observe service information
- Number of mounting bores at adapter: 2,6
- Condition: Remanufactured
More
-62%
compared to RRP:
£1420,55
£526,37
incl. 20% VAT, free delivery
Free delivery
Not in stock
Core exchange £211,46 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
You may also be interested in
Article №: 11-1291
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 12
- Outlet Ø [mm]: 12
- Net weight [kg]: 9
- Condition: Remanufactured
More
£297,59
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,92 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 714520691
Details
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Delphi
- Length [mm]: 1188
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,9
- Tie Rod Thread Size: M12
- Net weight [kg]: 5,19
- Condition: Remanufactured
More
£89,74
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £55,19 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520271
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1238
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 50
- Number of steering wheel turns: 2,9
- Entry Thread Size: M14
- Exit Thread Size: M16
- Net weight [kg]: 7,07
- Condition: Remanufactured
More
£230,63
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £86,10 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0259
Details
- Operating Mode: Hydraulic
- for steering gear manufacturer: ZF
- Length [mm]: 835
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Net weight [kg]: 7,34
- Condition: Remanufactured
More
-73%
compared to RRP:
£656,00
£171,11
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,73 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0772
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1135
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Number of steering wheel turns: 2,6
- Entry Thread Size: M18
- Exit Thread Size: M16
- Net weight [kg]: 5,79
- Condition: Remanufactured
More
£270,16
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £126,88 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0271
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1238
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 50
- Number of steering wheel turns: 2,9
- Entry Thread Size: M14
- Exit Thread Size: M16
- Net weight [kg]: 7,07
- Condition: Remanufactured
More
£254,35
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £52,87 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520262
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1140
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Entry Thread Size: M18
- Exit Thread Size: M16
- Manufacturer Restriction: Short pipe to top
- Net weight [kg]: 6,05
- Condition: Remanufactured
More
£228,77
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £110,37 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: SR900538
Details
- for steering gear manufacturer: JTEKT
- Input Shaft Diameter [mm]: 18,5
- Length [mm]: 1270
- Number of steering wheel turns: 3,7
- Stroke [mm]: 159
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering: with tie rod, without tie rod ends
- Inlet Ø [mm]: 11
- Outlet Ø [mm]: 12
- Thread Size 1: M18×1,5
- Condition: New
More
Article №: SPK-PL-010
Details
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1265
- Number of steering wheel turns: 2,6
- Net weight [kg]: 6,4
- Fabrication Number: SPK-PL-010
- Condition: New
More
Article №: 11-1431
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of steering wheel turns: 2,6
- Net weight [kg]: 9,1
- Condition: Remanufactured
More
£383,15
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,92 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520582
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1170
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Manufacturer Restriction: With EHPSP bracket
- Net weight [kg]: 6,5
- Condition: Remanufactured
More
£271,09
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £128,82 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0784
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Manufacturer Restriction: With EHPSP bracket
- Vehicle Equipment: for vehicles with servotronic steering
- Net weight [kg]: 6
- Condition: Remanufactured
More
£243,19
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,73 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 1244200200
Details
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: New
More
-44%
compared to RRP:
£209,52
£116,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JRP725
Details
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1140
- Input shaft height [mm]: 80
- Input shaft connector type: Rectangle
- Version: Generation II
- Observe technical data
- Condition: Remanufactured
More
-43%
compared to RRP:
£578,75
£324,56
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £211,46 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711521136
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Length [mm]: 1125
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 79
- Number of steering wheel turns: 2,75
- Inlet Ø [mm]: 12
- Outlet Ø [mm]: 11
- Net weight [kg]: 6,93
- Condition: Remanufactured
More
£290,15
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £82,79 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 14-0888
Details
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Delphi
- Length [mm]: 1220
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Net weight [kg]: 5,4
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 3,13
- Condition: Remanufactured
More
£103,22
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £47,58 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520264
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1136
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Number of steering wheel turns: 3
- Entry Thread Size: M18x1,5
- Exit Thread Size: M16x1,5
- Manufacturer Restriction: Gen 2
- Net weight [kg]: 6,3
- Condition: Remanufactured
More
£228,31
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £110,37 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0760
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1165
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Vehicle Equipment: for vehicles with servotronic steering
- Net weight [kg]: 6
- Condition: Remanufactured
More
£218,54
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,73 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 51783
Details
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1188
- Operating Mode: Mechanical
- Steering: with tie rod
- Steering Gear Type: Rack and Pinion Steering Gear
- Input shaft height [mm]: 108
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,5
- Tie Rod Thread Size: M12
- for steering gear manufacturer: Delphi
- Observe service information
- Exchange Part
- Condition: Remanufactured
More
-44%
compared to RRP:
£357,12
£199,94
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £53,14 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: JRP867
Details
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: ZF
- Manufacturer Exclusion: TRW
- Observe technical data
- Exchange Part
- Length [mm]: 1127
- Stroke [mm]: 146
- Thread Size: M14x1.5
- Input shaft height [mm]: 80
- Condition: Remanufactured
More
-57%
compared to RRP:
£1051,62
£451,51
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £211,46 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
