Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
-
Steering
- Track rod end VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Inner tie rod VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Tie rod VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Ball joint VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Power steering pump VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Steering rack VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Steering rack boot VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Power steering fluid VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0CDTI (47) 170 hp Diesel
- Suspension
- Towbar / parts
- Wiper and washer system
Steering rack VAUXHALL Insignia Mk2 (A) Country Tourer (G09) 2.0 CDTI (47) 170 hp Diesel
Article №: 286S1018R
Details
- Operating Mode: Electronic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Length [mm]: 1252
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Input shaft height [mm]: 120
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,8
- Net weight [kg]: 8
- Supplementary Article / Supplementary Info Info 2: Control unit must be re-programmed at vehicle manufacturer
- Condition: Remanufactured
More
£389,11
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £52,84 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: JRP8120
Details
- Vehicle Identification Number (VIN) from: C1000001
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without sensor
- Vehicle Equipment: for vehicles with power steering
- Left-/right-hand drive vehicles: for right-hand drive vehicles
- Length [mm]: 1245
- Input shaft height [mm]: 101
- Input Shaft Diameter [mm]: 20
- Thread Size: M16x1.5
- Stroke [mm]: 158
- Axle Joint Length [mm]: 196
- Axle Joint Thread Size: M16x1,5
- Number of steering wheel turns: 2,6
- Exchange Part
- Observe service information
- Condition: Remanufactured
More
You may also be interested in
Article №: 11-1291
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 12
- Outlet Ø [mm]: 12
- Net weight [kg]: 9
- Condition: Remanufactured
More
£319,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £106,23 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 714520691
Details
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Delphi
- Length [mm]: 1188
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,9
- Tie Rod Thread Size: M12
- Net weight [kg]: 5,19
- Condition: Remanufactured
More
£96,49
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £55,17 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520271
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1238
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 50
- Number of steering wheel turns: 2,9
- Entry Thread Size: M14
- Exit Thread Size: M16
- Net weight [kg]: 7,07
- Condition: Remanufactured
More
£247,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £86,06 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0259
Details
- Operating Mode: Hydraulic
- for steering gear manufacturer: ZF
- Length [mm]: 835
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Net weight [kg]: 7,34
- Condition: Remanufactured
More
£183,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,68 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0772
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1135
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Number of steering wheel turns: 2,6
- Entry Thread Size: M18
- Exit Thread Size: M16
- Net weight [kg]: 5,79
- Condition: Remanufactured
More
£290,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £126,82 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0271
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1238
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 50
- Number of steering wheel turns: 2,9
- Entry Thread Size: M14
- Exit Thread Size: M16
- Net weight [kg]: 7,07
- Condition: Remanufactured
More
£272,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £52,84 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520262
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1140
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Entry Thread Size: M18
- Exit Thread Size: M16
- Manufacturer Restriction: Short pipe to top
- Net weight [kg]: 6,05
- Condition: Remanufactured
More
£245,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £110,32 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: SPK-PL-010
Details
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1265
- Number of steering wheel turns: 2,6
- Net weight [kg]: 6,4
- Fabrication Number: SPK-PL-010
- Condition: New
More
Article №: 11-1431
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Saginaw
- Length [mm]: 1250
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Number of steering wheel turns: 2,6
- Net weight [kg]: 9,1
- Condition: Remanufactured
More
£411,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £106,23 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520582
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1170
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Manufacturer Restriction: With EHPSP bracket
- Net weight [kg]: 6,5
- Condition: Remanufactured
More
£289,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £128,77 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0784
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Manufacturer Restriction: With EHPSP bracket
- Vehicle Equipment: for vehicles with servotronic steering
- Net weight [kg]: 6
- Condition: Remanufactured
More
£260,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,68 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 1244200200
Details
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: New
More
£125,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JRP725
Details
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1140
- Input shaft height [mm]: 80
- Input shaft connector type: Rectangle
- Version: Generation II
- Observe technical data
- Condition: Remanufactured
More
£348,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £211,37 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711521136
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Length [mm]: 1125
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 79
- Number of steering wheel turns: 2,75
- Inlet Ø [mm]: 12
- Outlet Ø [mm]: 11
- Net weight [kg]: 6,93
- Condition: Remanufactured
More
£311,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £82,75 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 14-0888
Details
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: Delphi
- Length [mm]: 1220
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Net weight [kg]: 5,4
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 3,13
- Condition: Remanufactured
More
£110,99
incl. 20% VAT, excl. delivery costs
In stock
Core exchange £47,56 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 711520264
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1136
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 80
- Number of steering wheel turns: 3
- Entry Thread Size: M18x1,5
- Exit Thread Size: M16x1,5
- Manufacturer Restriction: Gen 2
- Net weight [kg]: 6,3
- Condition: Remanufactured
More
£245,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £110,32 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 11-0760
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW
- Length [mm]: 1165
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 34
- Number of steering wheel turns: 2,8
- Inlet Ø [mm]: 10,8
- Outlet Ø [mm]: 10,8
- Vehicle Equipment: for vehicles with servotronic steering
- Net weight [kg]: 6
- Condition: Remanufactured
More
£234,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £105,68 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 51783
Details
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1188
- Operating Mode: Mechanical
- Steering: with tie rod
- Steering Gear Type: Rack and Pinion Steering Gear
- Input shaft height [mm]: 108
- Input shaft connector type: Rectangle
- Number of steering wheel turns: 2,5
- Tie Rod Thread Size: M12
- for steering gear manufacturer: Delphi
- Observe service information
- Exchange Part
- Condition: Remanufactured
More
£214,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £53,12 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: JRP867
Details
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: ZF
- Manufacturer Exclusion: TRW
- Observe technical data
- Exchange Part
- Length [mm]: 1127
- Stroke [mm]: 146
- Thread Size: M14x1.5
- Input shaft height [mm]: 80
- Condition: Remanufactured
More
£485,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £211,37 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: JRP639
Details
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Operating Mode: Hydraulic
- Housing Type: Aluminium Housing
- Overall Length [mm]: 1138
- Distance of mounting bores [mm]: 435
- Input shaft height [mm]: 80
- Input shaft connector type: Rectangle
- Input Shaft Diameter [mm]: 17
- Version: Generation I
- Observe technical data
- Observe service information
- Condition: Remanufactured
More
£348,49
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £221,94 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 52521
Details
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1170
- Operating Mode: Mechanical
- Steering: with tie rod
- Steering Gear Type: Rack and Pinion Steering Gear
- Input shaft connector type: toothed
- for steering gear manufacturer: Mando
- Observe service information
- Exchange Part
- Condition: Remanufactured
More
£184,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £52,84 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 72-4785
Details
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: TRW Gen 1
- Length [mm]: 1140
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Entry Thread Size: M18
- Exit Thread Size: M16
- Manufacturer Restriction: Short pipe to bottom
- Condition: New
More
£327,99
incl. 20% VAT, free delivery
Free delivery
In stock
Core exchange £112,14 core charge (incl. 20% VAT) is NOT included The core charge will be refunded if you return the old spare part.
Details
Article №: 53961
Details
- Operating Mode: Electric
- Condition: New
More
