Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Coil spring Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Top strut mount and bearing Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Suspension kit, coil springs Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Shock absorber dust cover and bump stops Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Air suspension Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Boot, air suspension Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Air suspension compressor Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Hydraulic oil Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Camber bolts Prado 120 3.0D-4D (KDJ120) 166 hp Diesel
- Leaf spring LAND CRUISER 3.0D-4D (KDJ120) 166 hp Diesel
- Mounting, shock absorbers LAND CRUISER 3.0D-4D (KDJ120) 166 hp Diesel
- Relay, leveling control LAND CRUISER 3.0D-4D (KDJ120) 166 hp Diesel
- Shock absorber mounting brackets LAND CRUISER 3.0D-4D (KDJ120) 166 hp Diesel
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Prado 120 3.0 D-4D 166 hp Diesel

Article №: 24-104814
Details
- Product line: B6 4600
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles without electronic suspension control
- Length [mm]: 650, 369, 564
- Condition: New
More
£ 110,99
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24-104807
Details
- Product line: B6 Performance
- Fitting Position: Front Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles without electronic suspension control
- Length [mm]: 649, 429, 557
- Condition: New
More

Article №: B2338
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B2339
- Condition: New
More

Article №: B2339
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B2338
- Condition: New
More

Article №: A-3804G
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Piston Rod Diameter [mm]: 12,5
- Suspension Strut Outer Diameter [mm]: 49, 48,5
- Condition: New
More

Article №: E4133
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Additionally required articles (article numbers): Upper Kit No 321
- Condition: New
More

Article №: MM-AS141
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Spring Type: for vehicles with air suspension
- Condition: New
More

Article №: U4127
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More

Article №: 90-5404LSP3
Details
-
- Fitting Position: Rear Axle Left
- Spring Type: for vehicles without air suspension
- Raised Suspension ca. [mm]: 0-50 mm
- Quantity per axle: 1
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 595
- min. length [mm]: 392
- Colour: red
- adjustable: adjustable
- Packaging length [cm]: 500
- Packaging width [cm]: 85
- Packaging height [cm]: 85
- Condition: New
More

Article №: 20 455 0082
Details
- Fitting Position: Rear
- Length [mm]: 330
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 56,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 20 455 0701
Details
- Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 58,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 20 455 0181
Details
- Fitting Position: Rear
- Length [mm]: 325
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 63,49
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SK-2812
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Spring Type: for vehicles with air suspension
- Manufactured in: China
- Packaging length [cm]: 76
- Packaging width [cm]: 13,5
- Packaging height [cm]: 11
- Weight [kg]: 3
- Shock Absorber Design: Suspension Strut
- replacement in pairs recommended
- Net weight [kg]: 2,6
- Condition: New
More

Article №: SK-2813
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Spring Type: for vehicles with air suspension
- Manufactured in: USA
- Packaging length [cm]: 67
- Packaging width [cm]: 15
- Packaging height [cm]: 13,5
- Weight [kg]: 2,8
- Shock Absorber Design: Suspension Strut
- Replace in pairs only
- Net weight [kg]: 2,4
- Condition: New
More

Article №: 854S17802
Details
- Fitting Position: Rear Axle both sides
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£ 16,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 854S0664
Details
-
- Suspension: 0, for vehicles with electronic suspension control
- Check OE number
- Spring Type: for vehicles with air suspension
- for model code: KDJ120
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 45
- Quantity per axle: 2
- Length [mm]: 551, 414
- Standpipe Diameter [mm]: 12
- Condition: New
More
£ 27,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 854S1662
Details
-
- Suspension: for vehicles with electronic suspension control, for vehicles with standard suspension
- Spring Type: for vehicles with air suspension
- for model code: KDJ120
- Check OE number
- Vehicle type: KDJ120
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 45
- Quantity per axle: 1
- Length [mm]: 551, 414
- Thread Size: M12x1.5
- Standpipe Diameter [mm]: 12
- Condition: New
More
£ 28,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 854S17801
Details
-
- Quantity per axle: 2
- Spring Type: for vehicles without air suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 574
- min. length [mm]: 352
- Weight [kg]: 2,9
- Colour: red
- adjustable: adjustable
- Condition: New
More
£ 38,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: J4302018
Details
-
- for model code: KDJ 120
- Suspension: for vehicles without electronic suspension control
- Number of Doors: 5
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£ 13,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MSS020132
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£ 14,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 20A2041-JPN
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£ 20,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 01655589R
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Weight [kg]: 2,195
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Packaging length [cm]: 49,2
- Packaging width [cm]: 5,4
- Packaging height [cm]: 5,4
- Condition: New
More
£ 21,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MJ20056
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 4853060080
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: 01658659F
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Weight [kg]: 2,418
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Packaging length [cm]: 55,0
- Packaging width [cm]: 11,0
- Packaging height [cm]: 11,0
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details

Article №: MA-20074
Details
-
- Number of Doors: 3
- Vehicle type: KDJ 125
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 4853069365
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 140 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6