Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Coil spring Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Top strut mount and bearing Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Suspension kit, coil springs Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Shock absorber dust cover and bump stops Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Suspension kit, shock absorber and coil spring Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Hydraulic oil Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Mounting, shock absorbers Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Suzuki Swift Mk3 1.3 4x4 (RS 413, ZD11S) 90 hp Petrol
Article №: 33-26 623 0000
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Paired product: 33-26 623 0001
- Article number of recommended accessories: 614 640 0010
- Condition: New
More
-29%
compared to RRP:
£ 75,69
£ 53,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33-26 623 0001
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Paired product: 33-26 623 0000
- Article number of recommended accessories: 614 640 0010
- Condition: New
More
-29%
compared to RRP:
£ 75,69
£ 53,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA65340.20R
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 548
- min. length [mm]: 384
- Piston Rod Diameter [mm]: 20
- Standpipe Diameter [mm]: 45
- Paired product: SA65340.21L
- Piston Rod Thread: M12X125
- Condition: New
More
£ 54,86
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA65340.21L
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 548
- min. length [mm]: 384
- Piston Rod Diameter [mm]: 20
- Standpipe Diameter [mm]: 45
- Paired product: SA65340.20R
- Piston Rod Thread: M12X125
- Condition: New
More
£ 54,86
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG878003
Details
-
- Fitting Position: Front Axle Right
- Construction Year to: 09/2010
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Piston Rod Diameter [mm]: 20
- Length [mm]: 561, 382
- Paired product: QAG878004
- Condition: New
More
-65%
compared to RRP:
£ 161,15
£ 54,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGT604T
Details
- Supplementary Info: TWIN
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- Quantity per axle: 1
- Length [mm]: 575, 334
- Standpipe Diameter [mm]: 12
- Observe technical data
- Condition: New
More
-42%
compared to RRP:
£ 97,96
£ 56,72
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG878004
Details
-
- Fitting Position: Front Axle Left
- Construction Year to: 09/2010
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Piston Rod Diameter [mm]: 20
- Length [mm]: 561, 382
- Paired product: QAG878003
- Condition: New
More
-63%
compared to RRP:
£ 161,15
£ 59,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 333408
Details
- Product line: Excel-G
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Construction Year to: 09/2010
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Paired product: 333409
- Condition: New
More
-51%
compared to RRP:
£ 122,72
£ 59,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 313 660
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Parameter: SFE30/20X163A
- Paired product: 313 659
- Condition: New
More
-58%
compared to RRP:
£ 150,79
£ 63,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 313 659
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Parameter: SFE30/20X163A
- Paired product: 313 660
- Condition: New
More
-54%
compared to RRP:
£ 150,79
£ 68,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGM1151T
Details
- Product line: TWIN
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 45,5
- Quantity per axle: 1
- Length [mm]: 558, 394
- Standpipe Diameter [mm]: 20
- Observe technical data
- Condition: New
More
-44%
compared to RRP:
£ 143,59
£ 79,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8750-1092R
Details
-
- Fitting Position: Front Axle Right
- Quantity per axle: 1
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 621
- min. length [mm]: 422
- Colour: Orange
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
-14%
compared to RRP:
£ 94,33
£ 80,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8750-1092L
Details
-
- Fitting Position: Front Axle Left
- Quantity per axle: 1
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 621
- min. length [mm]: 422
- Colour: Orange
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
-13%
compared to RRP:
£ 94,33
£ 81,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B3220
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3221
- Condition: New
More
£ 106,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B3221
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3220
- Condition: New
More
£ 106,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-3912G
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 12,5
- Suspension Strut Outer Diameter [mm]: 39, 38,6
- Condition: New
More
£ 110,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B3222
Details
- Fitting Position: Rear Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3223
- Condition: New
More
Article №: B3223
Details
- Fitting Position: Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3222
- Condition: New
More
Article №: B2257
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B2258
- Condition: New
More
Article №: B2258
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B2257
- Condition: New
More
Article №: 20 455 0181
Details
- Fitting Position: Rear
- Length [mm]: 325
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 31,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 20 455 0082
Details
- Fitting Position: Rear
- Length [mm]: 330
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 53,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 20 455 0701
Details
- Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£ 55,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33-104652
Details
- Product line: B8 5125
- Fitting Position: Rear Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£ 118,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0130953
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 561
- min. length [mm]: 341
- Condition: New
More
-45%
compared to RRP:
£ 43,70
£ 23,86
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 143 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
