Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Coil spring Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Top strut mount and bearing Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Suspension kit, coil springs Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Shock absorber dust cover and bump stops Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Spring cap Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Camber bolts Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Mounting, shock absorbers Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Shock absorber mounting brackets Subaru Legacy 4 Estate 2.0AWD (BP5) 179 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Subaru Legacy 4 Estate 2.0 AWD (BP5) 179 hp Petrol
Article №: 854S0543
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1809
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132920
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- max. length [mm]: 505
- min. length [mm]: 344
- Condition: New
More
£29,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0131197
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317 148
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Parameter: SFE32X161A
- Paired product: 317 147
- Condition: New
More
£64,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317 147
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Parameter: SFE32X161A
- Paired product: 317 148
- Condition: New
More
£67,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-158686
Details
-
- Vehicle configuration line / variant: BL
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B4 OE Replacement
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: 312 924
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Vehicle Equipment: for vehicles without level control
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: SEXOV26X135A
- Condition: New
More
Article №: 22-248152
Details
-
- Vehicle configuration line / variant: BL
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B4 OE Replacement
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 22-248190
- Condition: New
More
£98,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22-248190
Details
-
- Vehicle configuration line / variant: BL
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B4 OE Replacement
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 22-248152
- Condition: New
More
£108,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B3446
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3447
- Condition: New
More
£132,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B3447
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: B3446
- Condition: New
More
£132,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-118323
Details
-
- Vehicle type: BP
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B6 Performance
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
Article №: A-3905G
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 12,5
- Suspension Strut Outer Diameter [mm]: 45
- Condition: New
More
Article №: 35-118312
Details
-
- Vehicle type: BP
- Suspension: for vehicles with standard suspension, for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B6 Performance
- Fitting Position: Front Axle Right
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 35-118305
- Condition: New
More
Article №: 35-118305
Details
-
- Vehicle type: BP
- Suspension: for vehicles with standard suspension, for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B6 Performance
- Fitting Position: Front Axle Left
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 35-118312
- Condition: New
More
Article №: 35-118343
Details
-
- Vehicle type: BP
- Suspension: for vehicles with sports suspension, for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B8 Performance Plus
- Fitting Position: Front Axle Right
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 35-118336
- Condition: New
More
Article №: 35-118336
Details
-
- Vehicle type: BP
- Suspension: for vehicles with sports suspension, for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Product line: B8 Performance Plus
- Fitting Position: Front Axle Left
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Paired product: 35-118343
- Condition: New
More
Article №: A-3904GL
Details
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 22
- Thread Size: M14x1,5
- Paired product: A-3904GR
- Suspension Strut Outer Diameter [mm]: 51
- Distance of mounting bores [mm]: 65
- Piston Rod Length [mm]: 198
- Bore Diameter 1 [mm]: 14,1
- Bore Diameter 2 [mm]: 14
- Condition: New
More
Article №: A-3904GR
Details
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 22
- Thread Size: M14x1,5
- Paired product: A-3904GL
- Suspension Strut Outer Diameter [mm]: 51
- Distance of mounting bores [mm]: 65
- Piston Rod Length [mm]: 198
- Bore Diameter 1 [mm]: 14,1
- Bore Diameter 2 [mm]: 14
- Condition: New
More
Article №: A-1122G
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Piston Rod Diameter [mm]: 12,5
- Suspension Strut Outer Diameter [mm]: 45
- Condition: New
More
Article №: 20 455 0701
Details
- Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
£48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1428
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£39,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 854S21167
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Condition: New
More
£62,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0132542
Details
-
- Vehicle configuration line / variant: BL
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without bad road version
- not for vehicle configuration line / variant: Outback
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£77,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 35 products
