Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Wheel hub Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Wheel bearing Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Top strut mount and bearing Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Anti-roll bar link Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Track rod end Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Engine mount Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Suspension kit Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Inner tie rod Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- ABS sensor Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
- Ball joint IMPREZA 1.5 (GD2) 101 hp Petrol
- Suspension bushes IMPREZA 1.5 (GD2) 101 hp Petrol
- Shock absorber dust cover and bump stops IMPREZA 1.5 (GD2) 101 hp Petrol
- Anti-roll bar bushes IMPREZA 1.5 (GD2) 101 hp Petrol
- Axle bushes IMPREZA 1.5 (GD2) 101 hp Petrol
- Wheel bolts and wheel nuts IMPREZA 1.5 (GD2) 101 hp Petrol
- Wheel spacers IMPREZA 1.5 (GD2) 101 hp Petrol
- Steering rack boot IMPREZA 1.5 (GD2) 101 hp Petrol
- Spring cap IMPREZA 1.5 (GD2) 101 hp Petrol
- Camber bolts IMPREZA 1.5 (GD2) 101 hp Petrol
- Anti-roll bar stabiliser kit IMPREZA 1.5 (GD2) 101 hp Petrol
- Shaft seal, wheel hub IMPREZA 1.5 (GD2) 101 hp Petrol
- Shock absorber mounting brackets IMPREZA 1.5 (GD2) 101 hp Petrol
- Towbar / parts
- Wiper and washer system
Axle bushes Subaru Impreza GD 1.5 (GD2) 101 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
SUBARU IMPREZA Saloon (GD) 1.5 (GD2) year of manufacture 2001, 101 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Info: 80 Sha
- Colour: red
- Material: PU (Polyurethane)
- Mounting Type: Rubber-Metal Mount
- Inner Diameter [mm]: 14
- Diameter [mm]: 55
- Height [mm]: 41
- Height 2 [mm]: 33
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Required quantity: 1
- Number of Parts [parts]: 20
- Shore-A hardness value, base body: 80
- Weight [kg]: 3,284
- Fitting Position: Front Axle, Rear Axle
- Colour: red
- Material: PU (Polyurethane)
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Control/Trailing Arm Type: for trailing arm, for control arm
- Condition: New
Over 100 in stock