Search for Control arm for VW NEW BEETLE 2004:
VW NEW BEETLE 2004 Control arm
Suspension parts VW NEW BEETLE 2004
- VW NEW BEETLE 2004 Wheel hub
- VW NEW BEETLE 2004 Wheel bearing
- VW NEW BEETLE 2004 Drive shaft
- VW NEW BEETLE 2004 Anti-roll bar link
More
Best goods: Wishbone NEW BEETLE 2004
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Supplementary Article / Supplementary Info Info 2: with axle joint, with coupling rod, with rubber mount, with ball joint
- Control/Trailing Arm Type: Control Arm
- Steering: with tie rod ends
- Full Set
- for components see parts list
- Quantity per axle: 1
- Axle alignment required after fitting
- Supplementary Info: t+
- Stabiliser Diameter [mm]: 21
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: VKDS 321102 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: L29545
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,600
- Packaging length [cm]: 49
- Packaging width [cm]: 37
- Packaging height [cm]: 9
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: VKDS 321004
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Hole Spacing 1/Hole Spacing 2: 276,4
- Control/Trailing Arm Design: Triangular Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: 19820
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,500
- Supplementary Article / Supplementary Info: with lock nut, with rubber mounts
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Paired product: VO-WP-1553P
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Bag
- Packaging length [cm]: 45
- Packaging width [cm]: 37,5
- Packaging height [cm]: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 2
- replacement in pairs recommended
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 420
- Height [mm]: 55
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 390
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 391
- Cone Size [mm]: 14,9
- Paired product: 210043
- Thread Size: M12X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,486
- as standard
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 520
- Weight [kg]: 1,08
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: V10-7298
- Thread Size: M12x1,25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,037
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 39,5
- Packaging height [cm]: 4
- Packaging Depth [cm]: 41
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
