Search for Clutch car parts for FORD TOURNEO CONNECT:
Ford TOURNEO CONNECT Clutch system
Clutch auto parts Ford TOURNEO CONNECT
- FORD TOURNEO CONNECT Clutch kit
- FORD TOURNEO CONNECT Flywheel
- FORD TOURNEO CONNECT Clutch master cylinder
- FORD TOURNEO CONNECT Clutch slave cylinder
- FORD TOURNEO CONNECT Gear selector cable
- FORD TOURNEO CONNECT Clutch plate
- FORD TOURNEO CONNECT Clutch pressure plate
- FORD TOURNEO CONNECT Clutch release bearing
- FORD TOURNEO CONNECT Clutch cable
- FORD TOURNEO CONNECT Gearbox gaskets
- FORD TOURNEO CONNECT Clutch pedal switch
More
Top Car part makers
Best goods: Clutch for Ford TOURNEO CONNECT
incl. 20% VAT, free delivery
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 20,37, 20,56
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8, 19,61
- Mounting Type: Clipped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 28
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 25,9 x 22,9
- Weight [kg]: 6,56
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-45%
compared to RRP:
£800,97
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,1 x 22,9
- Weight [kg]: 6,38, 6,5
- Bore Diameter [mm]: 32
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Number of mounting bores at central slave cylinder: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fabrication Number: NSP-FR-004
- Condition: New
Over 100 in stock
-36%
compared to RRP:
£418,18
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with flywheel screws
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
