Search for Clutch kit for VW TIGUAN 2017:
VW TIGUAN 2017 Clutch kit
Clutch parts VW TIGUAN 2017
- VW TIGUAN 2017 Flywheel
- VW TIGUAN 2017 Clutch master cylinder
- VW TIGUAN 2017 Clutch slave cylinder
- VW TIGUAN 2017 Gear selector cable
More
Best goods: Clutch and flywheel kit TIGUAN 2017
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Clutch Type: for wet clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 6,19
- for flywheel manufacturer: LUK
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,02, 18,13
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 29
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 19,84
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 18,37
- Number of mounting bores: 6
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,3 x 21,8
- Weight [kg]: 6,15
- Bore Diameter [mm]: 29
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Material: Plastic
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 04L 141 015 S1
- Observe service information
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
