Search for Clutch kit VW PASSAT :
VW PASSAT Clutch kit
Clutch parts Volkswagen PASSAT
- VW PASSAT Flywheel
- VW PASSAT Clutch master cylinder
- VW PASSAT Clutch slave cylinder
- VW PASSAT Gear selector cable
More
Best goods: Clutch and flywheel kit VW PASSAT
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
-56%
compared to RRP:
£1124,39
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
-58%
compared to RRP:
£809,74
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- only available in set
- Condition: New
Over 100 in stock
-56%
compared to RRP:
£227,33
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 220
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
-66%
compared to RRP:
£773,03
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- only available in set
- Condition: New
Over 100 in stock
-59%
compared to RRP:
£610,67
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: DFC
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Mounting Type: Pre-assembled
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Clutch Type: for wet clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws
- New Part
- Hub Profile: 20,3 x 22,1
- Weight [kg]: 14,57
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
-10%
compared to RRP:
£1531,13
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
-71%
compared to RRP:
£1126,39
incl. 20% VAT, excl. delivery costs
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- for components see parts list
- Mounting Type: not pre-mounted
- Observe service information
- Condition: New
Over 100 in stock
-68%
compared to RRP:
£368,27
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 23
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-73%
compared to RRP:
£460,11
incl. 20% VAT, excl. delivery costs
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 21,8x24,3-23N
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
-53%
compared to RRP:
£879,29
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
-70%
compared to RRP:
£571,25
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
-71%
compared to RRP:
£411,52
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT3P
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 22,10 x 20,30
- Weight [kg]: 4,8
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 221
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Mounting Type: Pre-assembled
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 12
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
-57%
compared to RRP:
£263,47
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Condition: New
Over 100 in stock
Top Manufacturers: Clutch kit VW PASSAT
Clutch set VW PASSAT: product prices from popular manufacturers:
| Brand | Number of products | Lowest price | Highest price |
|---|---|---|---|
| VALEO | 148 | 5.51 | 1659.67 |
| LuK | 152 | 51.05 | 1304.09 |
| SACHS | 144 | 79.11 | 928.73 |
| AISIN | 48 | 88.77 | 900.67 |
| EXEDY | 65 | 110.85 | 1957.29 |
| SACHS PERFORMANCE | 6 | 1322.49 | 4450.49 |
148
VALEO
152
LuK
144
SACHS
48
AISIN
65
EXEDY
6
SACHS PERFORMANCE
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
