Search for Clutch kit for RENAULT VEL SATIS 2011:
RENAULT VEL SATIS 2011 Clutch kit
Clutch parts RENAULT VEL SATIS 2011
- RENAULT VEL SATIS 2011 Flywheel
- RENAULT VEL SATIS 2011 Clutch master cylinder
- RENAULT VEL SATIS 2011 Clutch slave cylinder
- RENAULT VEL SATIS 2011 Gear selector cable
More
Best goods: Clutch and flywheel kit VEL SATIS 2011
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Number of mounting bores at central slave cylinder: 3
- Condition: New
Over 100 in stock
-56%
compared to RRP:
£280,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 229
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info: with central slave cylinder
- Number of mounting bores: 3
- Clutch Equipment: with CSC
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-48%
compared to RRP:
£247,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 229
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 77 01 475 950 S2
- Observe service information
- Condition: New
Over 100 in stock
-39%
compared to RRP:
£274,99
incl. 20% VAT, free delivery
- Diameter [mm]: 229
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 77 01 475 950 S1
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, without central slave cylinder
- New Part
- Hub Profile: 24,8 x 21,2
- Weight [kg]: 21,94
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 25
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Condition: New
Over 100 in stock
-51%
compared to RRP:
£1439,50
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 230
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Number of mounting bores at central slave cylinder: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT2P
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 24,8 x 21,2
- Weight [kg]: 4,84
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Condition: New
Over 100 in stock
-53%
compared to RRP:
£288,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 229
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 25 x 21
- Weight [kg]: 5,58
- Bore Diameter [mm]: 27
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
