Search for Clutch kit NISSAN QASHQAI :
NISSAN QASHQAI Clutch kit
Clutch parts Nissan QASHQAI
- NISSAN QASHQAI Flywheel
- NISSAN QASHQAI Clutch master cylinder
- NISSAN QASHQAI Clutch slave cylinder
- NISSAN QASHQAI Gear selector cable
More
Best goods: Clutch and flywheel kit NISSAN QASHQAI
incl. 20% VAT, free delivery
- Diameter [mm]: 208
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 30 x 18 x 28 x 16
- Weight [kg]: 7,59
- Clutch: for vehicles with double clutch
- Clutch Type: for wet clutch
- Clutch Pressure Plate Outer Diameter [mm]: 208
- Outer Diameter 2 [mm]: 208
- Number of Teeth 1: 16
- Number of Teeth 2: 28
- Check OE number
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19
- Number of mounting bores: 7
- only to be used within set
- Bore Diameter [mm]: 30
- Tightening Torque [Nm]: 65
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT3P (CSC)
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,8 x 21,3
- Weight [kg]: 4,62
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
-68%
compared to RRP:
£281,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch disc, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Hub Profile: 24.8 x 21
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT4P - CONVERSION KIT
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws, without central slave cylinder
- New Part
- Hub Profile: 21,2 x 24,8
- Weight [kg]: 15,76
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 65
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,8 x 21,2
- Weight [kg]: 5,93
- Bore Diameter [mm]: 30
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,8 x 21,1
- Weight [kg]: 5,95
- Clutch: for vehicles with push type clutch
- Bore Diameter [mm]: 30
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 2
- Material: Plastic
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-60%
compared to RRP:
£265,94
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Alternative Repair Kit: 3000 951 607
- only available in set
- Condition: New
Over 100 in stock
-60%
compared to RRP:
£535,72
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Alternative Repair Kit: 3000 970 137
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: x21
- Friction Lining Outer Diameter [mm]: 250
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, without central slave cylinder
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Fabrication Number: NZS-RE-000
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 19.2x22.2
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Friction Lining Outer Diameter 1 [mm]: 230
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 21,2 x 24,5 - 21N
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: flywheel
- Condition: New
Over 100 in stock
-48%
compared to RRP:
£291,83
incl. 20% VAT, free delivery
- Product line: Kit plus CSC
- Diameter [mm]: 215
- Number of Teeth: 26
- for components see parts list
- Alternative Repair Kit: 3000 950 668
- Hydraulic connector diameter [mm]: 13,3
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 250
- Diameter 1 [mm]: 250
- Diameter 2 [mm]: 240
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 21,16 x 24,6
- Version: HEC
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: without central slave cylinder
- Fabrication Number: NZS-RE-002
- Gross Weight [kg]: 25, 25,000
- Net Weight [g]: 24500
- Condition: New
Over 100 in stock
-14%
compared to RRP:
£80,56
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 225
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 24,8 x 21
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 21,3 x 24,6 - 21N
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: cover, disc
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT2P
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 21,5 x 20,1
- Weight [kg]: 5,33, 5,2
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 217
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 21
- Supplementary Article / Supplementary Info: without central slave cylinder, with clutch pressure plate
- Condition: New
Over 100 in stock
Top Manufacturers: Clutch kit NISSAN QASHQAI
Clutch set NISSAN QASHQAI: product prices from popular manufacturers:
| Brand | Number of products | Lowest price | Highest price |
|---|---|---|---|
| VALEO | 34 | 73.47 | 2987.59 |
| LuK | 37 | 77.87 | 1111.87 |
| SACHS | 34 | 76.11 | 1209.55 |
| AISIN | 23 | 91.95 | 1128.15 |
| EXEDY | 25 | 101.19 | 1349.03 |
| SACHS PERFORMANCE | 0 | 0 | 0 |
34
VALEO
37
LuK
34
SACHS
23
AISIN
25
EXEDY
0
SACHS PERFORMANCE
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
