Search for Clutch kit for AUDI A3 2003:
AUDI A3 2003 Clutch kit
Clutch parts AUDI A3 2003
- AUDI A3 2003 Flywheel
- AUDI A3 2003 Clutch master cylinder
- AUDI A3 2003 Clutch slave cylinder
- AUDI A3 2003 Gear selector cable
More
Best goods: Clutch and flywheel kit A3 2003
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,98
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
-17%
compared to RRP:
£1531,13
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
-42%
compared to RRP:
£837,25
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
-54%
compared to RRP:
£747,63
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 15,03
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 20,3 x 22,1
- Weight [kg]: 14,57
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
-59%
compared to RRP:
£425,53
incl. 20% VAT, free delivery
- Product line: Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Alternative Repair Kit: 3000 950 070
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 600
- Clutch Type: sintered disc with torsion springs
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
