Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake pads SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- ABS sensor SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper repair kit SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Handbrake SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake disc back plate SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake pad wear sensor SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper carrier SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake hose SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Master cylinder OCTAVIA 2.0TDi 150 hp Diesel
- Handbrake cable OCTAVIA 2.0TDi 150 hp Diesel
- Vacuum pump OCTAVIA 2.0TDi 150 hp Diesel
- Guide sleeve kit, brake caliper OCTAVIA 2.0TDi 150 hp Diesel
- Brake fluid OCTAVIA 2.0TDi 150 hp Diesel
- Brake pad fitting kit OCTAVIA 2.0TDi 150 hp Diesel
- Brake pads and discs OCTAVIA 2.0TDi 150 hp Diesel
- Brake caliper piston OCTAVIA 2.0TDi 150 hp Diesel
- Brake disc bolts OCTAVIA 2.0TDi 150 hp Diesel
- High-performance brake pads OCTAVIA 2.0TDi 150 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs SKODA Octavia IV Saloon (NX3) 2.0 TDi 150 hp Diesel

Article №: 92120505
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZU
- Product line: PRO+
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Height [mm]: 49,7
- Weight [kg]: 8,6
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£ 130,50
£ 55,77
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 92120800
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 24,9
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Height [mm]: 49,7
- Weight [kg]: 7,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Drilled: no
- Condition: New
More
£ 55,77
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 9081214
Details
- for PR number: 1ZK
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,74
- Surface: Coated
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 57,22
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 600.3258.52
Details
-
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: 5E-L-000 001 >>
- for PR number: 1KD
- Diameter [mm]: 253
- Brake Disc Type: solid, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 61
- Weight [kg]: 3,6
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
-54%
compared to RRP:
£ 128,95
£ 58,68
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BG5166C
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZB
- Diameter [mm]: 306
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 65
- Height [mm]: 49,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: E4 90R-02C0703/2629
- Condition: New
More
£ 60,13
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.9145.75
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Brake System: ATE
- Product line: Xtra
- Diameter [mm]: 288
- Brake Disc Type: internally vented, slotted
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Surface: Coated
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 61,10
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 100.3381.52
Details
-
- Fitting Position: Rear Axle
- for combined PR number: 0N1+1KE
- Diameter [mm]: 272
- Brake Disc Type: solid, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 58
- Weight [kg]: 4,1
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Condition: New
More
£ 61,59
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24.0122-0219.1
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KJ, 0N4
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 22,0
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 65,0
- Inner Diameter [mm]: 169,0
- Height [mm]: 48,5
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118/0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
-49%
compared to RRP:
£ 124,07
£ 62,07
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24.0125-0158.1
Details
-
- for PR number: 1ZK, 1ZU
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 25,0
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Inner Diameter [mm]: 146,0
- Height [mm]: 49,9
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115/1001
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-53%
compared to RRP:
£ 135,20
£ 63,04
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 600.3243.20
Details
-
- Fitting Position: Front Axle
- for PR number: 1LG
- Brake Caliper Colour: red
- Product line: COAT Z
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 10,7
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 65,95
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.9145.1X
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Brake System: ATE
- Product line: Xtra
- Diameter [mm]: 288
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22,8
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Surface: Coated
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 66,92
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.9772.75
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZK
- Brake System: TRW
- Product line: Xtra
- Diameter [mm]: 312
- Brake Disc Type: internally vented, slotted
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 67,41
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.A200.75
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N4, 1KJ
- Brake System: ATE
- Product line: Xtra
- Diameter [mm]: 310
- Brake Disc Type: internally vented, slotted
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Condition: New
More
£ 68,86
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 600.3271.20
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Vehicle Identification Number (VIN) from: NX-M-000 001
- Diameter [mm]: 306
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,6
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Condition: New
More
£ 70,32
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 8DD 355 134-611
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZB
- Diameter [mm]: 306
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 145
- Height [mm]: 49,7
- Weight [kg]: 8,6
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£ 128,81
£ 73,23
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 0 986 479 C90
Details
-
- TecDoc Engine Number: DSTB, DTTC, DTTA
- Construction Year to: 06/2024
- Fitting Position: Front Axle
- for PR number: 1LG
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 65
- Height [mm]: 49,7
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 75,65
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.9772.1X
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZK
- Brake System: TRW
- Product line: Xtra
- Diameter [mm]: 312
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22,8
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 78,56
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BS-8036HC
Details
- for PR number: 1ZK, 1ZU
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49,7
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-36%
compared to RRP:
£ 128,87
£ 81,47
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 09.A200.1X
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N4, 1KJ
- Brake System: ATE
- Product line: Xtra
- Diameter [mm]: 310
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20,5
- Centering Diameter [mm]: 65
- Height [mm]: 48
- Surface: Coated
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 82,93
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 92334805
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZB
- Diameter [mm]: 306
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 145
- Height [mm]: 49,7
- Weight [kg]: 8,6
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Drilled: no
- Condition: New
More
-38%
compared to RRP:
£ 135,42
£ 83,41
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: BS-8044C
Details
- for PR number: 0N4, 1KJ
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-27%
compared to RRP:
£ 119,58
£ 86,32
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 100.3300.52
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZU
- Product line: SPORT COAT Z
- Diameter [mm]: 312
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,3
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
-56%
compared to RRP:
£ 200,74
£ 87,78
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 100.3309.52
Details
-
- Fitting Position: Rear Axle
- Brake Caliper Colour: red
- for combined PR number: 0N4+1KJ
- Product line: SPORT COAT Z
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 49
- Weight [kg]: 6,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
-58%
compared to RRP:
£ 211,86
£ 88,26
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 600.3221.53
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Vehicle Identification Number (VIN) from: NX-L-000 001 >>
- Diameter [mm]: 288
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 7,35
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- directional
- Condition: New
More
£ 94,08
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: LVBD1510
Details
-
- Fitting Position: Rear Axle
- for PR number: 0N4, 1KJ
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 48,5
- Weight [kg]: 6,8
- Surface: Coated
- Condition: New
More
£ 111,06
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- ...
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12