Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake pads SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- ABS sensor SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper repair kit SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Handbrake SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake disc back plate SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake pad wear sensor SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake caliper carrier SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Brake hose SKODA Octavia IV Saloon (NX3) 2.0TDi 150 hp Diesel
- Master cylinder OCTAVIA 2.0TDi 150 hp Diesel
- Handbrake cable OCTAVIA 2.0TDi 150 hp Diesel
- Vacuum pump OCTAVIA 2.0TDi 150 hp Diesel
- Guide sleeve kit, brake caliper OCTAVIA 2.0TDi 150 hp Diesel
- Brake fluid OCTAVIA 2.0TDi 150 hp Diesel
- Brake pad fitting kit OCTAVIA 2.0TDi 150 hp Diesel
- Brake pads and discs OCTAVIA 2.0TDi 150 hp Diesel
- Brake caliper piston OCTAVIA 2.0TDi 150 hp Diesel
- Brake disc bolts OCTAVIA 2.0TDi 150 hp Diesel
- High-performance brake pads OCTAVIA 2.0TDi 150 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs SKODA Octavia IV Saloon (NX3) 2.0 TDi 150 hp Diesel
Article №: 600.3271.52
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Vehicle Identification Number (VIN) from: NX-M-000 001
- Diameter [mm]: 306
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,5
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Condition: New
More
£ 88,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF2825C
Details
-
- Fitting Position: Rear Axle
- Axle: Rigid Axle
- for PR number: 0N1, 1KE
- Paired product: FDB5356
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 58
- Weight [kg]: 8,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Drilled: no
- Condition: New
More
£ 93,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.3309.53
Details
-
- Fitting Position: Rear Axle
- Brake Caliper Colour: red
- for combined PR number: 0N4+1KJ
- Diameter [mm]: 310
- Brake Disc Type: Externally Vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Height [mm]: 49
- Weight [kg]: 6,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90APPROVED
- directional
- Condition: New
More
-57%
compared to RRP:
£ 226,07
£ 96,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600.3271.53
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Vehicle Identification Number (VIN) from: NX-M-000 001
- Diameter [mm]: 306
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 23,0
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,5
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- directional
- Condition: New
More
£ 101,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0130-0225.1
Details
-
- Fitting Position: Front Axle
- for PR number: 1LG
- Diameter [mm]: 340,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 30,0
- Minimum thickness [mm]: 27,0
- Centering Diameter [mm]: 65,0
- Inner Diameter [mm]: 145,0
- Height [mm]: 49,6
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115/0407
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-50%
compared to RRP:
£ 210,94
£ 104,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600.3243.52
Details
-
- Fitting Position: Front Axle
- for PR number: 1LG
- Brake Caliper Colour: red
- Product line: SPORT COAT Z
- Diameter [mm]: 340
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 10,7
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
-56%
compared to RRP:
£ 243,24
£ 104,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.3300.53
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZU
- Product line: BLACK Z
- Diameter [mm]: 312
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 8,3
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- directional
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£ 232,12
£ 105,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-8784C
Details
- for PR number: 0N4, 1KE, 2EC
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Brake System: BOSCH
- Height [mm]: 48
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 130,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 600.3243.55
Details
-
- Fitting Position: Front Axle Right
- for PR number: 1LG
- Brake Caliper Colour: red
- Diameter [mm]: 340
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 65
- Height [mm]: 50
- Weight [kg]: 10,7
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Paired product: 600.3243.54
- directional
- Condition: New
More
Article №: BS-8022HC
Details
- for PR number: 1ZE
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Height [mm]: 49,5
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
Article №: VFX43701
Details
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented, two-part brake disc, perforated/nubby
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Weight [kg]: 9,8
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
Article №: 40H9015-JPN
Details
- for PR number: 1KJ
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Height [mm]: 48,2
- Drilled: no
- Condition: New
More
-14%
compared to RRP:
£ 19,36
£ 16,48
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C4A022ABE
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 271,8
- Brake Disc Type: solid
- Number of Holes: 9
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- Drilled: no
- Condition: New
More
£ 19,39
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011004091-PCS-MS
Details
- for PR number: 1KE, 0N1
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 58,3
- Surface: Coated
- No. of holes 2: 9
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Net weight [kg]: 3,72
- Gross Weight [kg]: 3,90
- Condition: New
More
£ 20,36
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 231-04-011-2
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 2EC, 0N4
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Centering Diameter [mm]: 65
- Height [mm]: 48,2
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-641, 131-07-642, 131-07-721, 131-07-722, 131-07-723, 131-07-724
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 21,82
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C4W024ABE
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 15,2, 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 58,3
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Condition: New
More
£ 21,82
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011004091PR-PCS-MS
Details
- for PR number: 1KE, 0N1
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 58,3
- Surface: Coated
- No. of holes 2: 9
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Net weight [kg]: 4,10
- Gross Weight [kg]: 4,30
- Condition: New
More
£ 22,30
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011004091PR-PCS-MSP
Details
- for PR number: 1KE, 0N1
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 58,3
- Surface: Coated
- No. of holes 2: 9
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Net weight [kg]: 3,72
- Gross Weight [kg]: 3,9
- Condition: New
More
£ 22,79
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011003561-PCS-MS
Details
- for PR number: 1KE, 2EC, 0N4
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height [mm]: 48,2
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 3,90
- Gross Weight [kg]: 4,10
- Drilled: no
- Condition: New
More
-37%
compared to RRP:
£ 37,01
£ 23,27
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24011003561-PCS-MSP
Details
- for PR number: 1KE, 2EC, 0N4
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height [mm]: 48,2
- Required quantity: 2
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 4,13
- Condition: New
More
£ 23,27
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: B130295P
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 2EC, 0N4
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height [mm]: 48,2
- Surface: Painted
- Bore Diameter [mm]: 15,3
- Condition: New
More
£ 24,73
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: B130847
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 0N1
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140,0
- Height [mm]: 58,3
- No. of holes 2: 9
- Bore Diameter [mm]: 15,2
- Condition: New
More
£ 26,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-00-0901C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Height [mm]: 48
- Surface: Painted
- Tightening Torque [Nm]: 120
- for OE number: 5Q0615601D
- Drilled: no
- Condition: New
More
£ 26,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: PB 2958
Details
- for PR number: 1ZE
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Overall Height [mm]: 49,9
- Condition: New
More
£ 26,67
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6110556
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140,2
- Height [mm]: 48,3
- Surface: Painted, Cross-hatch
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- for combined PR number: 0N4+1KJ
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£ 94,25
£ 31,03
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- ...
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
