Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Coil spring Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Top strut mount and bearing Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Suspension kit, coil springs Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Shock absorber dust cover and bump stops Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Boot, air suspension Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Suspension kit, shock absorber and coil spring Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Repair kit, wheel suspension Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Spring cap Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Camber bolts Octavia 5e5 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Relay, leveling control OCTAVIA 1.5TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Octavia 5e5 1.5 TSI G-TEC 130 hp Petrol/Compressed Natural Gas (CNG)
Article №: 33-104652
Details
- Product line: B8 5125
- Fitting Position: Rear Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£ 125,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1106
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- max. length [mm]: 625
- Piston Rod Diameter [mm]: 13
- Suspension Strut Outer Diameter [mm]: 59
- Shock absorber eyelet diameter [mm]: 59
- Condition: New
More
-65%
compared to RRP:
£ 49,60
£ 17,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 854S2450
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 55
- Check OE number
- Condition: New
More
-58%
compared to RRP:
£ 100,60
£ 42,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0132207
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- max. length [mm]: 625
- Piston Rod Diameter [mm]: 13
- Suspension Strut Outer Diameter [mm]: 59
- Shock absorber eyelet diameter [mm]: 59
- Condition: New
More
-65%
compared to RRP:
£ 49,60
£ 17,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0133216
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Quantity per axle: 2
- Axle: Four-Link Axle
- Net weight [kg]: 2,03
- Gross Weight [kg]: 2,15
- Condition: New
More
-65%
compared to RRP:
£ 49,60
£ 17,18
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: A-AU-032
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Fabrication Number: A-AU-032
- Condition: New
More
£ 21,38
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 32156340
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Condition: New
More
£ 23,24
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SSA-10640
Details
-
- Fitting Position: Rear Axle
- Axle: Rigid Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Diameter [mm]: 38
- Length [mm]: 647
- Condition: New
More
£ 25,10
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: GH-339955
Details
- Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- Condition: New
More
£ 25,10
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 11-1203
Details
-
- Suspension: for vehicles with increased ground clearance, for vehicles with sports suspension
- Axle: Rigid Axle
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Distance of mounting bores [mm]: 45
- Article number of recommended accessories: 72-5702
- replacement in pairs recommended
- Condition: New
More
£ 26,50
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: A-AU-030
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Replace in pairs only
- Length [mm]: 550
- Suspension Strut Outer Diameter [mm]: 50
- Observe technical data
- Fabrication Number: A-AU-030
- Condition: New
More
£ 26,50
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: A-AU-029
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Fabrication Number: A-AU-029
- Condition: New
More
£ 26,50
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MJ00827
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control
- max. length [mm]: 625
- Piston Rod Diameter [mm]: 13
- for OE number: 3Q0513049EQ
- Shock absorber eyelet diameter [mm]: 59
- Socket Width 1 [mm]: 56
- Condition: New
More
£ 26,96
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 32356290
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Condition: New
More
£ 28,82
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0133267
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Piston Rod Diameter [mm]: 13
- Length [mm]: 640, 650
- Suspension Strut Outer Diameter [mm]: 45
- Condition: New
More
-53%
compared to RRP:
£ 66,69
£ 30,83
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0133268
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£ 30,83
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: TL C00377.2
Details
-
- Suspension: for vehicles without electronic suspension control
- Check OE number
- Fitting Position: Front Axle, both sides
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Packing Type: Box
- Condition: New
More
£ 33,47
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0132329
Details
-
- Fitting Position: Left, Right
- for PR number: 7IM, 7LM, 7ZV, G01, G04, G12, G13, L04, L05, L06, L07, L08, L09, L10, L26, L27, L28, L29, L30, L31, L32
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Clamp, Top pin
- Piston Rod Diameter [mm]: 22
- Net weight [kg]: 3,95
- Condition: New
More
-49%
compared to RRP:
£ 67,90
£ 34,59
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0133158
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£ 34,59
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 811 253
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 232-01-170
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- for OE number: 5QA 413 031 AA
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 35,33
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: A3410174
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Weight [kg]: 3,821
- Length [mm]: 440
- Width [mm]: 170
- Height [mm]: 170
- Condition: New
More
£ 36,26
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 26110-003R
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Weight [kg]: 1,93
- for combined PR number: UC7+0N1, 1JA+K8D, 1JC+K8B, UC1+K8B, UC7+K8B, UC7+K8D
- Packaging length [cm]: 47,5
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,5
- Condition: New
More
£ 41,38
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0132522
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- max. length [mm]: 540
- min. length [mm]: 375
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
-60%
compared to RRP:
£ 105,50
£ 41,70
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: SKSA-0133221
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 51
- Length [mm]: 344, 511
- Standpipe Diameter [mm]: 25
- Condition: New
More
-60%
compared to RRP:
£ 105,50
£ 41,70
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 141 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
