Car part
    - Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- 
                    Damping
                                            - Shock absorber Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Coil spring Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Top strut mount and bearing Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Suspension kit, coil springs Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Shock absorber dust cover and bump stops Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Boot, air suspension Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Suspension kit, shock absorber and coil spring Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Repair kit, wheel suspension Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
- Relay, leveling control Skoda Kodiaq NS 2.0TDI 4x4 200 hp Diesel
 
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Skoda Kodiaq NS 2.0 TDI 4x4 200 hp Diesel
 
                Article №: 8245-1387
            Details
                    - 
            - Fitting Position: Rear Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
 
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 632
- min. length [mm]: 405
- Colour: red
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
    £112,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: C2516S
            Details
                    - 
            - Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
 
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Weight [kg]: 5,568
- Operating Mode: Electronic
- Packaging length [cm]: 59,1
- Packaging width [cm]: 20,7
- Packaging height [cm]: 21,2
- Condition: New
More
    £118,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 24-229890
            Details
                    - for PR number: 0N4
- Product line: B6 Performance
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles with lowered suspension
- Axle: Multi-link Axle
- Length [mm]: 677
- Condition: New
More
    £125,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 8750-1123
            Details
                    - 
            - Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
 
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 582
- min. length [mm]: 405
- Colour: Orange
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
    £129,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: C1521S
            Details
                    - 
            - Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
 
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Weight [kg]: 4,2
- Operating Mode: Electronic
- Packaging length [cm]: 69,6
- Packaging width [cm]: 13,3
- Packaging height [cm]: 13,6
- Condition: New
More
    £138,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 8240-1311SPORT
            Details
                    - 
            - Fitting Position: Rear Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
 
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 633
- min. length [mm]: 400
- Colour: yellow
- adjustable: adjustable
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
     
                Article №: 8745-1388
            Details
                    - 
            - Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
 
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 584
- min. length [mm]: 402
- Braking/Drive Dynamics: for vehicles without electronic drive dynamics control
- Manufacturer Restriction: Front: OE struts
- Colour: red
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
     
                Article №: A-VW-004
            Details
                    - Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Braking/Drive Dynamics: for vehicles with DCC suspension
- Fabrication Number: A-VW-004
- Condition: New
More
     
                Article №: A-VW-003
            Details
                    - Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Braking/Drive Dynamics: for vehicles with DCC suspension
- Fabrication Number: A-VW-003
- Condition: New
More
     
                Article №: 35-267126
            Details
                    - Product line: B6 Performance
- Fitting Position: Front Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with lowered suspension
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
     
                Article №: GH-359967
            Details
                    - Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Shock Absorber System: Twin-Tube, Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 5,568
- Operating Mode: Electronic
- Article number of recommended accessories: GH-369964, GH-399961, GH-693610
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
     
                Article №: 35-274018
            Details
                    - Product line: B6 Performance
- Fitting Position: Front Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
     
                Article №: DSE001G
            Details
                    - Fitting Position: Front Axle
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 5,38
- Condition: New
More
     
                Article №: 8741-1572Sport
            Details
                    - 
            - Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
 
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 584
- min. length [mm]: 407
- Colour: yellow
- adjustable: adjustable
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
     
                Article №: 11-1228
            Details
                    - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Length [mm]: 372, 550
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
     
                Article №: 20-267520
            Details
                    - Product line: B4 OE Replacement (DampTronic®)
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Axle: Multi-link Axle
- for OE number: 5QF 513 045 H
- Condition: New
More
     
                Article №: 23-238978
            Details
                    - Product line: B4 OE Replacement (DampTronic®)
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- for OE number: 5QF 413 031 AC, 5QF 413 032 A
- Length [mm]: 372, 550
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
     
                Article №: 11-1229
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Condition: New
More
     
                Article №: 20 455 0181
            Details
                    - Fitting Position: Rear
- Length [mm]: 325
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
    £26,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 20 455 0701
            Details
                    - Fitting Position: Rear
- Length [mm]: 404
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
    £47,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 20 455 0082
            Details
                    - Fitting Position: Rear
- Length [mm]: 330
- Colour: black
- Vehicle type: Motorcycle
- Condition: New
More
    £49,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 33-104652
            Details
                    - Product line: B8 5125
- Fitting Position: Rear Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
    £127,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 854S1106
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- max. length [mm]: 625
- Piston Rod Diameter [mm]: 13
- Suspension Strut Outer Diameter [mm]: 59
- Shock absorber eyelet diameter [mm]: 59
- Condition: New
More
    £17,41
            incl. 20% VAT, excl. delivery costs
                                        Not in stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKSA-0133216
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Quantity per axle: 2
- Axle: Four-Link Axle
- Net weight [kg]: 2,03
- Gross Weight [kg]: 2,15
- Condition: New
More
    £17,41
            incl. 20% VAT, excl. delivery costs
                                        Not in stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKSA-0132207
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- max. length [mm]: 625
- Piston Rod Diameter [mm]: 13
- Suspension Strut Outer Diameter [mm]: 59
- Shock absorber eyelet diameter [mm]: 59
- Condition: New
More
    £17,41
            incl. 20% VAT, excl. delivery costs
                                        Not in stock
            
            
            
            
            
            
            
            Details
        Showing 25 out of 71 products
            
            Show the next items
            
        
    
    
    
- 1
- 2
- 3
 
                                     
                                     
                                     
                                    