Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
- Coil spring Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
- Top strut mount and bearing Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
- Shock absorber dust cover and bump stops Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
- Spring cap Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Renault Sandero Stepway 2 1.6 (B8JA) 113 hp Petrol
Article №: 854S0887
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
-53%
compared to RRP:
£38,70
£17,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S2453
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle type: STEPWAY
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Replace in pairs only
- Condition: New
More
£19,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S18557
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 45
- Quantity per axle: 1
- Length [mm]: 350, 516
- Standpipe Diameter [mm]: 20
- Condition: New
More
-62%
compared to RRP:
£68,10
£25,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S20208
Details
- Fitting Position: Rear Axle both sides
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£38,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0133564
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle type: STEPWAY
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Replace in pairs only
- Condition: New
More
£19,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0907
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with bad road version
- Parameter: SFE30/20X166A
- Condition: New
More
£25,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0906
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Parameter: ST30/20X153A
- Condition: New
More
£27,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGT1340T
Details
-
- Check OE number
- Suspension: for vehicles with increased ground clearance
- Supplementary Info: TWIN
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 38
- Piston Rod Diameter [mm]: 11
- Quantity per axle: 1
- Length [mm]: 362, 607
- Condition: New
More
-66%
compared to RRP:
£82,27
£27,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 357091070000
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper Module
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Spring Type: for vehicles with coil spring suspension
- Length [mm]: 595, 356
- Diameter 1 [mm]: 38
- Diameter 2 [mm]: 25
- Condition: New
More
-66%
compared to RRP:
£82,44
£27,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: G1147
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Piston Rod Diameter [mm]: 11
- Weight [kg]: 1,800
- Length [mm]: 397, 633
- Bore Diameter [mm]: 25
- Article number of recommended accessories: PK314
- Packaging length [cm]: 60
- Packaging width [cm]: 7,2
- Packaging height [cm]: 7,2
- Condition: New
More
£28,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AGR154MT
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
£28,80
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16-26 725 0029
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle type: STEPWAY
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Replace in pairs only
- Article number of recommended accessories: 16-14 740 0001
- Condition: New
More
-44%
compared to RRP:
£54,15
£30,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-1540
Details
-
- Suspension: for vehicles with standard suspension
- not for vehicle type: STEPWAY
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Article number of recommended accessories: 72-3681
- replacement in pairs recommended
- Condition: New
More
£31,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 5152100600
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber, Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles without increased ground clearance
- Condition: New
More
-35%
compared to RRP:
£48,49
£31,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGM1150S
Details
- Supplementary Info: SINGLE
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 45
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 2
- Length [mm]: 350, 516
- Check OE number
- Condition: New
More
-64%
compared to RRP:
£88,71
£31,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JGM1150T
Details
- Supplementary Info: TWIN
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 45
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Length [mm]: 350, 516
- Check OE number
- Condition: New
More
-63%
compared to RRP:
£88,76
£32,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: G7457
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 20
- Weight [kg]: 4,150
- Bore Diameter [mm]: 30
- Article number of recommended accessories: MK496, PK286
- Packaging length [cm]: 57,1
- Packaging width [cm]: 17
- Packaging height [cm]: 17
- Customs tariff number: 87088035
- Condition: New
More
£33,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG181112
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with increased ground clearance
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Length [mm]: 596, 388
- Condition: New
More
-46%
compared to RRP:
£62,24
£33,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 343834
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles without increased ground clearance
- Condition: New
More
£33,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 316 976
Details
-
- Fitting Position: Rear Axle
- not for vehicle configuration line / variant: SUV Version
- Check OE number
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: TT27/11X238A
- Condition: New
More
-64%
compared to RRP:
£95,45
£33,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-01336277
Details
- Fitting Position: Rear Axle both sides
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10480
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with increased ground clearance
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10517
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£43,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10602
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
£44,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-1402
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles without increased ground clearance
- Condition: New
More
£45,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 55 products
Show the next items
- 1
- 2
- 3
