Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Coil spring Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Top strut mount and bearing Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Suspension kit, coil springs Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Shock absorber dust cover and bump stops Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Air suspension Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Air suspension compressor Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Spring cap Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Mounting, shock absorbers Renault Kangoo 2 Express 1.2TCe 115 (FW02, FW14) 115 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Renault Kangoo 2 Express 1.2 TCe 115 (FW02, FW14) 115 hp Petrol
Article №: 854S19330
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Required quantity: 1
- Condition: New
More
£23,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1920
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension
- max. length [mm]: 562
- min. length [mm]: 360
- Housing Diameter [mm]: 47
- Condition: New
More
-65%
compared to RRP:
£95,50
£33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S1040
Details
-
- Vehicle type: Kangoo Rapid
- Fitting Position: Left, Right
- Suspension: for vehicles with heavy duty suspension
-
- Vehicle type: Kangoo Express
- Fitting Position: Left, Right
- Suspension: for vehicles with heavy duty suspension
-
- Vehicle type: Kangoo Rapid
- Fitting Position: Left, Right
- Payload: for increased payload
-
- Wheelbase [mm]: 3081
- Wheelbase: long wheelbase
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 22
- Weight [kg]: 4,800
- Length [mm]: 357, 560
- Distance of mounting bores [mm]: 72
- Bore Diameter [mm]: 32
- Housing diameter in clamping area [mm]: 52
- Condition: New
More
-47%
compared to RRP:
£74,10
£39,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S2087
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 51
- Quantity per axle: 1
- Length [mm]: 357, 559
- Standpipe Diameter [mm]: 22
- Condition: New
More
£39,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32112620
Details
-
- Suspension: for vehicles with standard suspension
- for OE number: 82 00 800 724, 82 00 868 514
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£28,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: FT11130
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension
- max. length [mm]: 564
- min. length [mm]: 357
- Condition: New
More
-60%
compared to RRP:
£74,57
£29,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 563005
Details
-
- for OE number: 56 21 061 97R, 82 00 540 753, 82 00 604 056
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Check OE number
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Parameter: SE27/13X117A
- Condition: New
More
£29,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSF167G
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- for OE number: 82 00 800 724, 82 00 868 514
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Condition: New
More
£30,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16-26 725 0017
Details
-
- Wheelbase [mm]: 2313
- Wheelbase: short wheelbase
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top eye
- Replace in pairs only
- Condition: New
More
-30%
compared to RRP:
£45,60
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000081
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye
- Suspension: for vehicles with standard suspension
- Condition: New
More
£33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10604
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top eye
- Diameter [mm]: 53
- Length [mm]: 398
- Condition: New
More
£35,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AGR137MT
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Length [mm]: 272, 397
- Condition: New
More
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0932
Details
-
- Wheelbase [mm]: 2313
- Wheelbase: for shortened wheelbase
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top eye
- Parameter: SE27/13X117A
- Condition: New
More
£39,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 453010
Details
-
- Vehicle type: Kangoo Express, Kangoo Rapid
- Suspension: for vehicles with heavy duty suspension
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin
- Diameter 1 [mm]: 51
- Condition: New
More
£39,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132141
Details
-
- Vehicle type: Kangoo Rapid
- Fitting Position: Left, Right
- Suspension: for vehicles with heavy duty suspension
-
- Vehicle type: Kangoo Express
- Fitting Position: Left, Right
- Suspension: for vehicles with heavy duty suspension
-
- Vehicle type: Kangoo Rapid
- Fitting Position: Left, Right
- Payload: for increased payload
-
- Wheelbase [mm]: 3081
- Wheelbase: long wheelbase
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 22
- Weight [kg]: 4,800
- Length [mm]: 357, 560
- Distance of mounting bores [mm]: 72
- Bore Diameter [mm]: 32
- Housing diameter in clamping area [mm]: 52
- Condition: New
More
-47%
compared to RRP:
£74,10
£39,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0133200
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 51
- Quantity per axle: 1
- Length [mm]: 357, 559
- Standpipe Diameter [mm]: 22
- Condition: New
More
£39,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S19330P
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Required quantity: 1
- Condition: New
More
-58%
compared to RRP:
£96,78
£40,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32350650
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Condition: New
More
£46,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2000080
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Condition: New
More
£47,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32303240
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£47,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 854S2087P
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Yoke
- Diameter [mm]: 51
- Suspension: for vehicles with standard suspension
- Quantity per axle: 1
- Length [mm]: 357, 559
- Standpipe Diameter [mm]: 22
- Condition: New
More
-51%
compared to RRP:
£99,61
£48,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-0713
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Distance of mounting bores [mm]: 75
- Article number of recommended accessories: 16-14 640 0009
- Condition: New
More
£52,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH540324
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Required quantity: 1
- Condition: New
More
£52,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSB249G
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Bottom Pin
- Suspension: for vehicles with standard suspension
- Diameter 1 [mm]: 51
- Bore Distance [mm]: 75
- Condition: New
More
£56,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11-1121
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 47
- Check OE number
- Condition: New
More
£57,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 100 products
Show the next items
- 1
- 2
- 3
- 4
