Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
-
Heating and ventilation
- Cabin filter Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Blower motor Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Heater matrix Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Heater resistor Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Blower control unit Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Outside temperature sensor Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Outside temperature sensor Peugeot Boxer 250 Van 2.0 BlueHDi 163 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
PEUGEOT BOXER Box 2.0 BlueHDi year of manufacture 2015, 163 hp vehicle parts products
Article №: KTT070003
incl. 20% VAT, excl. delivery costs
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Cable Length [mm]: 300
- Observe service information
- Fabrication Number: ECT-PE-000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Cable Length [mm]: 300
- Number of pins: 2
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of circuits: 2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of pins: 2
- Housing Colour: black
- Connector Shape: oval
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Sensor Type: NTC Sensor
- Number of pins: 2
- Housing Colour: grey
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article / Supplementary Info Info 2: without cable
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6
- Component Number: G17
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of connectors: 2
- Weight [kg]: 0,01
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of pins: 2
- Fabrication Number: ECT-FR-000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of pins: 2
- Connector Shape: oval
- Fabrication Number: ECT-PL-000
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Connector Shape: oval
- Assy./disassy. by qualified personnel required!
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Connector Shape: oval
- Number of pins: 2
- Condition: New
Over 100 in stock
