Car part
    - Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- 
                    Damping
                                            - Shock absorber Peugeot 308 SW 1.4 16V 95 hp Petrol
- Coil spring Peugeot 308 SW 1.4 16V 95 hp Petrol
- Top strut mount and bearing Peugeot 308 SW 1.4 16V 95 hp Petrol
- Suspension kit, coil springs Peugeot 308 SW 1.4 16V 95 hp Petrol
- Shock absorber dust cover and bump stops Peugeot 308 SW 1.4 16V 95 hp Petrol
- Repair kit, wheel suspension Peugeot 308 SW 1.4 16V 95 hp Petrol
- Spring cap Peugeot 308 SW 1.4 16V 95 hp Petrol
- Hydraulic oil Peugeot 308 SW 1.4 16V 95 hp Petrol
- Camber bolts Peugeot 308 SW 1.4 16V 95 hp Petrol
- Relay, leveling control Peugeot 308 SW 1.4 16V 95 hp Petrol
- Mounting, shock absorbers 308 1.4 16V 95 hp Petrol
 
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Peugeot 308 SW 1.4 16V 95 hp Petrol
 
                Article №: 854S0317
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- max. length [mm]: 633
- min. length [mm]: 379
- Piston Rod Diameter [mm]: 15
- Suspension Strut Outer Diameter [mm]: 51
- Condition: New
More
    £25,22
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 854S2207
            Details
                    - Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 51
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Length [mm]: 491, 323
- Condition: New
More
    £33,47
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 854S0787
            Details
                    - Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 20
- Weight [kg]: 4,400
- Length [mm]: 330, 515
- Bore Diameter [mm]: 27
- Condition: New
More
    £36,77
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKSA-0130824
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper, Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- max. length [mm]: 633
- min. length [mm]: 379
- Piston Rod Diameter [mm]: 15
- Suspension Strut Outer Diameter [mm]: 51
- Condition: New
More
    £25,22
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 562811
            Details
                    - 
            - Construction Year from: 01/2008
- Fitting Position: Rear Axle
- Suspension: for vehicles without heavy duty suspension
- Article number of recommended accessories: MK430, PK131
 
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 643
- min. length [mm]: 415
- Condition: New
More
    £26,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 560605
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Condition: New
More
    £27,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: A-PE-000
            Details
                    - Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Replace in pairs only
- Observe technical data
- Fabrication Number: A-PE-000
- Condition: New
More
    £29,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 344408K-PCS-MS
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Quantity per axle: 2
- Net weight [kg]: 2,06
- Gross Weight [kg]: 2,21
- Condition: New
More
    £30,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 452805R
            Details
                    - Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Condition: New
More
    £31,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SSA-10070
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Condition: New
More
    £32,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: DSF124G
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 2000851
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: GH-331905
            Details
                    - Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Article number of recommended accessories: GH-694707
- Condition: New
More
    £33,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 4152103000
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Suspension: for vehicles without bad road version
- Condition: New
More
    £34,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: JGT1154T
            Details
                    - Product line: TWIN
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Diameter [mm]: 39
- Suspension: for vehicles with heavy duty suspension
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Length [mm]: 652, 389
- Observe technical data
- Condition: New
More
    £34,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 2000151
            Details
                    - Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
    £36,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: SKSA-0131823
            Details
                    - Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Piston Rod Diameter [mm]: 20
- Weight [kg]: 4,400
- Length [mm]: 330, 515
- Bore Diameter [mm]: 27
- Condition: New
More
    £36,77
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: MA-00627
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 5206AA
- Overall Length [mm]: 700
- Condition: New
More
    £37,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: MJ00627
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 5206AA
- Overall Length [mm]: 700
- Condition: New
More
    £38,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: A-PE-007
            Details
                    - Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Replace in pairs only
- Paired product: A-PE-008
- Observe technical data
- Fabrication Number: A-PE-007
- Condition: New
More
    £44,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                                                
         
                Article №: A-PE-008
            Details
                    - Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Replace in pairs only
- Paired product: A-PE-007
- Observe technical data
- Fabrication Number: A-PE-008
- Condition: New
More
    £44,49
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 2000152
            Details
                    - Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
    £50,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 854S2207P
            Details
                    - Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 51
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Length [mm]: 491, 323
- Condition: New
More
    £54,58
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 11-1114
            Details
                    - Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles without heavy duty suspension, for vehicles with standard suspension
- Article number of recommended accessories: 11-14 740 0001
- Condition: New
More
    £54,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
         
                Article №: 11-1664
            Details
                    - Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with standard suspension
- Condition: New
More
    £60,99
            incl. 20% VAT, excl. delivery costs
                                        In stock
            
            
            
            
            
            
            
            Details
        Showing 25 out of 169 products
            
            Show the next items
            
        
    
    
    
- 1
- 2
- 3
- 4
- 5
- 6
- 7
 
                                     
                                     
                                     
                                     
                                     
                                     
                                    