Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Coil spring Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Top strut mount and bearing Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Suspension kit, coil springs Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Shock absorber dust cover and bump stops Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Suspension kit, shock absorber and coil spring Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Spring cap Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Hydraulic oil Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Camber bolts Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Opel Insignia A g09 2.0 Turbo (68) 250 hp Petrol
Article №: G2515
Details
-
- Fitting Position: Rear Axle
- not for vehicle configuration line / variant: SRi
- Vehicle Equipment: for vehicles without level control
- Suspension: for vehicles without electronic suspension control
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Piston Rod Diameter [mm]: 12,4
- Weight [kg]: 1,900
- Bore Diameter [mm]: 25
- Article number of recommended accessories: MK447R, MK448L, PK419
- Packaging length [cm]: 50,5
- Packaging width [cm]: 6,4
- Packaging height [cm]: 6,4
- Condition: New
More
£33,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 626 725 0020
Details
-
- Suspension: for vehicles with standard suspension, for vehicles without FlexRide suspension
- Vehicle Identification Number (VIN) to: D1999999
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Supplementary Article / Supplementary Info Info 2: without suspension strut support mount
- Replace in pairs only
- Article number of recommended accessories: 614 740 0001
- Condition: New
More
-32%
compared to RRP:
£51,90
£34,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2220
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom Pin
- Additionally required articles (article numbers): Upper Kit No 002, Lower Kit No 161
- Condition: New
More
£35,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 350 144
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension, for vehicles without FlexRide suspension
- Vehicle Identification Number (VIN) to: D1999999
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: SEOV30XA
- Condition: New
More
-55%
compared to RRP:
£82,87
£36,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG181384
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with lowered suspension, for vehicles without FlexRide suspension, for vehicles without height-adjustable suspension, for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Article №: 2048
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Additionally required articles (article numbers): Upper Kit No 002, Lower Kit No 002
- Condition: New
More
£38,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA95313.20
Details
-
- Vehicle Identification Number (VIN): [;A1999999], [;E1999999], [F1000001;]
- Suspension: for vehicles with lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 631
- min. length [mm]: 431
- Piston Rod Diameter [mm]: 12
- Standpipe Diameter [mm]: 45
- Piston Rod Thread: M10X125
- Condition: New
More
£39,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSA-0132633
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension, for vehicles without FlexRide suspension
- Vehicle Identification Number (VIN) to: D1999999
- Fitting Position: Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
-58%
compared to RRP:
£97,30
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2619
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Paired product: 2692
- Additionally required articles (article numbers): Upper Kit No 002, Lower Kit No 002
- Condition: New
More
£40,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA95313.13
Details
-
- Vehicle Identification Number (VIN): [;A1999999], [;E1999999], [F1000001;]
- Suspension: for vehicles with lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Top eye
- max. length [mm]: 564
- min. length [mm]: 360
- Piston Rod Diameter [mm]: 12
- Standpipe Diameter [mm]: 45
- Piston Rod Thread: M10X125
- Condition: New
More
£40,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: E3560
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Additionally required articles (article numbers): Upper Kit No 169
- Condition: New
More
£41,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: E2800
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top eye, Bottom eye
- Additionally required articles (article numbers): Upper Kit No 002, Lower Kit No 002
- Condition: New
More
£41,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: A-PL-033
Details
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Paired product: A-PL-032
- Fabrication Number: A-PL-033
- Condition: New
More
£42,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 350 142
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with bad road version, for vehicles without FlexRide suspension, for vehicles with lowered suspension
- Vehicle Identification Number (VIN) to: B1999999
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Parameter: SEOV30/13X211A
- Condition: New
More
-51%
compared to RRP:
£89,36
£43,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 315437-PCS-MS
Details
-
- not for vehicle type: OPC
- Suspension: for vehicles without FlexRide suspension
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Paired product: 315438-PCS-MS
- Net weight [kg]: 4,46
- Gross Weight [kg]: 4,98
- Article number of recommended accessories: 189915012
- Condition: New
More
-31%
compared to RRP:
£79,07
£54,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 315438-PCS-MS
Details
-
- not for vehicle type: OPC
- Suspension: for vehicles without FlexRide suspension
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Quantity per axle: 1
- Replace in pairs only
- Paired product: 315437-PCS-MS
- Net weight [kg]: 4,46
- Gross Weight [kg]: 5,22
- Article number of recommended accessories: 189915012
- Condition: New
More
-31%
compared to RRP:
£79,07
£54,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32307812
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with lowered suspension, for vehicles without FlexRide suspension
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Paired product: 32307811
- Condition: New
More
£55,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MM-00806
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom eye
- for OE number: 13234170
- Condition: New
More
£56,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSB270G
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension, for vehicles without FlexRide suspension
- Vehicle Identification Number (VIN) to: D1999999
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DSB271G
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension, for vehicles without FlexRide suspension
- Vehicle Identification Number (VIN) to: D1999999
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-353624V
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with lowered suspension, for vehicles without FlexRide suspension
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle, Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Paired product: GH-353624H
- Article number of recommended accessories: GH-691501
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GH-353624H
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with lowered suspension, for vehicles without FlexRide suspension
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- Paired product: GH-353624V
- Article number of recommended accessories: GH-691501, GH-623623
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SSA-10483
Details
-
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with lowered suspension, for vehicles without FlexRide suspension
- Vehicle Equipment: for vehicles without level control
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Paired product: SSA-10482
- Condition: New
More
£60,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00970
Details
-
- not for vehicle type: OPC
- Suspension: for vehicles without FlexRide suspension
- Fitting Position: Front Axle Left
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- for OE number: 13219124
- Paired product: MA-00969
- Article number of recommended accessories: SMA0191
- Condition: New
More
£64,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MA-00969
Details
-
- not for vehicle type: OPC
- Suspension: for vehicles without FlexRide suspension
- Fitting Position: Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- for OE number: 13245965
- Paired product: MA-00970
- Article number of recommended accessories: SMA0191
- Condition: New
More
£84,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 157 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
