Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
-
Filters
- Air filter NISSAN Xterra (N50) 4.0 265 hp Petrol
- Oil filter NISSAN Xterra (N50) 4.0 265 hp Petrol
- Fuel filter NISSAN Xterra (N50) 4.0 265 hp Petrol
- Cabin filter NISSAN Xterra (N50) 4.0 265 hp Petrol
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Lighting
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Fuel filter NISSAN Xterra (N50) 4.0 265 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN Xterra (N50) 4.0 year of manufacture 2008, 265 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Filter type: Filter Insert
- Height [mm]: 141,8
- Diameter [mm]: 89,2
- Inner Diameter 2 [mm]: 32
- Manufacturer Restriction: MAHLE
- Housing Type: for housing with screwed lid
- Net Weight [g]: 162
- Packaging height [cm]: 18,00
- Packaging length [cm]: 9,5
- Packaging width [cm]: 9,50
- Condition: New
Over 100 in stock
-47%
compared to RRP:
£29,80
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 190
- Diameter [mm]: 93
- Thread Size: M20x1.5
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Gasket inside diameter [mm]: 63
- Gasket outside diameter [mm]: 72
- Condition: New
Over 100 in stock
-58%
compared to RRP:
£96,64
incl. 20% VAT, excl. delivery costs
- Filter type: In-Line Filter, with filter heating
- Height [mm]: 123,8
- Diameter [mm]: 86,5
- Inlet Ø [mm]: 10
- Outlet Ø [mm]: 8,0
- for OE number: A651 090 2952
- Packaging width [cm]: 10,16, 10,20
- Packaging length [cm]: 10,2
- Packaging height [cm]: 12,7, 12,70
- Net Weight [g]: 448, 494
- Condition: New
Over 100 in stock
-74%
compared to RRP:
£45,72
incl. 20% VAT, excl. delivery costs
- Filter type: Filter Insert
- Height [mm]: 115,8
- Diameter [mm]: 89,2
- Inner Diameter 2 [mm]: 32
- Manufacturer Restriction: MAHLE
- Housing Type: for housing with screwed lid
- Net Weight [g]: 140
- Packaging height [cm]: 16,00
- Packaging length [cm]: 9,5
- Packaging width [cm]: 9,50
- Condition: New
Over 100 in stock
-60%
compared to RRP:
£21,22
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 93,5
- Diameter [mm]: 76,0
- Diameter 2 [mm]: 72,0
- Thread Size: 3/4"-16UNF-2B
- Sealing Ring Diameter [mm]: 62,0
- Article number of the recommended special tool: OCS 1
- Tightening Torque [Nm]: 20
- Packaging height [cm]: 10,00
- Net Weight [g]: 340
- Packaging length [cm]: 8,0
- Packaging width [cm]: 8,00
- Condition: New
Over 100 in stock