Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub Nissan Patrol Y61 2.8D 100 hp Diesel
- Wheel bearing Nissan Patrol Y61 2.8D 100 hp Diesel
- Anti-roll bar link Nissan Patrol Y61 2.8D 100 hp Diesel
- Engine mount Nissan Patrol Y61 2.8D 100 hp Diesel
- Track rod end Nissan Patrol Y61 2.8D 100 hp Diesel
- Suspension bushes Nissan Patrol Y61 2.8D 100 hp Diesel
- Shock absorber dust cover and bump stops Nissan Patrol Y61 2.8D 100 hp Diesel
- Steering knuckle Nissan Patrol Y61 2.8D 100 hp Diesel
- Anti-roll bar bushes Nissan Patrol Y61 2.8D 100 hp Diesel
- Axle bushes Nissan Patrol Y61 2.8D 100 hp Diesel
- Wheel bolts and wheel nuts PATROL 2.8D 100 hp Diesel
- Wheel spacers PATROL 2.8D 100 hp Diesel
- Spring cap PATROL 2.8D 100 hp Diesel
- Wheel nuts PATROL 2.8D 100 hp Diesel
- Towbar / parts
- Wiper and washer system
Suspension arm Nissan Patrol Y61 2.8 D 100 hp Diesel
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN Patrol GR V Off-Road (Y61) 2.8 D year of manufacture 1998, 100 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Quantity Unit: Set
- Net weight [kg]: 9,00
- Gross Weight [kg]: 9,27
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: 42630
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,16
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Trailing Arm
- Paired product: SCA-6692
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 390
- Height [mm]: 70
- Paired product: TC1307
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 375
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 430
- Height [mm]: 85
- Paired product: TC2467
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 390
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Rear
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 430
- Height [mm]: 85
- Paired product: TC2468
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 390
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 282
- Cone Size [mm]: 16
- Paired product: 210476
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 2,094
- as standard
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Supplementary Info: Original VAICO Quality
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Paired product: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 360
- Height [mm]: 51, 50,5
- Paired product: TC3910
- Thread Size 1: 19.95
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 319
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 360
- Height [mm]: 51, 50,5
- Paired product: TC3911
- Thread Size 1: 19.95
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 319
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 346
- Paired product: JTC2563
- Diameter 1 [mm]: 14,2
- Condition: New
Over 100 in stock
