Car part
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Ignition and preheating
- Oils and fluids
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub NISSAN 180SX (S13) 1.8 Turbo II 201 hp Petrol
- Wheel bearing NISSAN 180SX (S13) 1.8 Turbo II 201 hp Petrol
- Anti-roll bar link NISSAN 180SX (S13) 1.8 Turbo II 201 hp Petrol
- Track rod end NISSAN 180SX (S13) 1.8 Turbo II 201 hp Petrol
- Wiper and washer system
Anti-roll bar link NISSAN 180SX (S13) 1.8 Turbo II 201 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN 180 SX Coupe (S13) 1.8 Turbo II year of manufacture 1989, 201 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 115
- Thread Size 1: M10XP1.25
- Internal Thread [mm]: M10XP1.25
- Supplementary Article / Supplementary Info: with bush
- Supplementary Article / Supplementary Info Info 2: with nut, with washers
- Weight [g]: 226
- Height [mm]: 46
- Condition: New
Over 100 in stock

-68%
compared to RRP:
£38,94
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 248
- Thread Size: M10x1.25
- Supplementary Article / Supplementary Info: with accessories
- Pipe Diameter [mm]: 9
- Condition: New
Over 100 in stock

-19%
compared to RRP:
£21,15
incl. 20% VAT, excl. delivery costs
- Supplementary Info: Quality
- Fitting Position: Rear Axle, Front Axle
- Rod/Strut: Coupling Rod
- Length [mm]: 250
- Thread Size 1: M10x1.5
- Thread Size 2: M10x1.5
- Required quantity: 2
- Supplementary Article / Supplementary Info: with spanner attachment
- reinforced version
- replacement in pairs recommended
- with environmental seal: Carbon Neutral
- Condition: New
Over 100 in stock

-23%
compared to RRP:
£14,99
incl. 20% VAT, excl. delivery costs
- Supplementary Info: OE Turbo NEW
- Fitting Position: Front Axle Left, Front Axle Right
- Rod/Strut: Coupling Rod
- Length [mm]: 248
- Weight [kg]: 0,240
- Pipe Diameter [mm]: 8
- Observe service information
- External Thread Size: M10 x 1,25
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rod/Strut: Coupling Rod
- Length [mm]: 273
- Thread Size 1: M10X1.25
- Thread Size 2: M10X1.25
- Thread Type: with right-hand thread
- Diameter 3 [mm]: 8
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 8,5
- Packaging height [cm]: 6,5
- Condition: New
Over 100 in stock