Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Coil spring MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Top strut mount and bearing MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Suspension kit, coil springs MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Shock absorber dust cover and bump stops MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Spring cap MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Camber bolts MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Shock absorber mounting brackets MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Camber bolts MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) 75 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) 1.3 (CB1A) year of manufacture 1992, 75 hp vehicle parts products
-26%
compared to RRP:
£8,99
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Weight [kg]: 0,095
- External Thread Size: M12 x 1,5
- Spanner Size: 18
- Bolt Head-/Nut Design: Male Hex
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower
- Weight [kg]: 0,22
- Quality/ Grade: 10.9
- Required quantity: 2
- Screw length below head [mm]: 240
- Thread Size: M12X1.25
- Surface: Zinc-coated
- Spanner Size: 19
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Upper
- Weight [kg]: 0,352
- Thread Size: M16X2
- Supplementary Article / Supplementary Info Info 2: with eccentric washer, with nut
- Screw length below head [mm]: 169
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Thread Length [mm]: 45
- Quality/ Grade: 10.9
- Spanner Size: 24
- Surface: Zinc-coated
- Condition: New
Over 100 in stock
Screw Kit, suspension strut / wheel bearing housing Upper, Lower, Front axle both sides (TEDGUM)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Upper, Lower, Front axle both sides
- Weight [kg]: 1,408
- Screw length below head [mm]: 169
- Spanner Size: 24
- Supplementary Article / Supplementary Info Info 2: with eccentric washer, with nut
- Thread Size: M16X2
- Thread Length [mm]: 45
- Surface: Zinc-coated
- Number of Parts [parts]: 4
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,400
- Packaging length [cm]: 24
- Packaging width [cm]: 19
- Packaging height [cm]: 4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Observe service information
- Length [mm]: 91
- External Thread Size: M12 x 1,5
- Quality/ Grade: 10.9
- Screw length below head [mm]: 80
- Condition: New
Over 100 in stock
Screw Kit, suspension strut / wheel bearing housing Lower, Upper, Front axle both sides (TEDGUM)
incl. 20% VAT, excl. delivery costs
- Fitting Position: Lower, Upper, Front axle both sides
- Weight [kg]: 0,704
- Thread Length [mm]: 45
- Thread Size: M16X2
- Supplementary Article / Supplementary Info Info 2: with eccentric washer, with nut
- Required quantity: 2
- Quality/ Grade: 10.9
- Number of Parts [parts]: 2
- Spanner Size: 24
- Screw length below head [mm]: 169
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Surface: Zinc-coated
- Condition: New
Over 100 in stock
Screw Kit, suspension strut / wheel bearing housing (MONROE)
£17,85
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,200
- Condition: New
Screw Kit, suspension strut / wheel bearing housing (MONROE)
£217,13
incl. 20% VAT, free delivery
- Weight [kg]: 5,000
- Packaging length [cm]: 52
- Packaging width [cm]: 34
- Packaging height [cm]: 14
- Condition: New
Screw Kit, suspension strut / wheel bearing housing (MONROE)
£202,56
incl. 20% VAT, free delivery
- Weight [kg]: 8,300
- Packaging length [cm]: 41,5
- Packaging width [cm]: 30,5
- Packaging height [cm]: 15
- Condition: New
£11,27
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,100
- Condition: New
£4,22
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,200
- Condition: New
